D-Link WAP54G manual Configuring Wireless-G Access Point, Setup Tab

Page 49

Instant Wireless® Series

Chapter 6: Configuring the

Wireless-G Access Point

Note: The Access Point is designed to function properly after using the Setup Wizard. This chapter is provided solely for those who wish to perform more advanced configuration or monitoring.

The Access Point has been designed to be functional right out of the box, with the default settings in the Setup Wizard. However, if you’d like to change these settings, the Access Point can be configured through your web browser with the Web-Based Utility. This chapter explains how to configure the Access Point in this manner.

Open your web browser and type

 

the IP Address you entered in the

 

Setup Wizard (the default IP

 

address is 192.168.1.245). Press

 

the Enter key and the following

 

screen, shown in Figure 6-1, will

 

appear. Leave the User Name

 

field blank. The first time you

 

open the Web-based Utility, use

 

the default password admin. You

 

can set a new password on the

Figure 6-1

Password screen shown in Figure

 

6-5.

 

The Setup Tab

 

The first screen that appears, shown in Figure 6-2, is the Setup tab. This allows you to change the Access Point’s general settings. Change these settings as described here, and click the Apply button to apply your changes or Cancel to cancel your changes. If you require online help, click the Help button.

•Firmware Version. This displays the current version of the Access Point’s firmware. Firmware should only be upgraded if you experience problems with the Access Point and can be upgraded from the Help tab.

•AP Name. You may assign any name to the Access Point. Unique, memo- rable names are helpful, especially if you are employing multiple access points on the same network. Verify this is the name you wish to use and

Wireless-G Access Point

LAN

•MAC Address. The MAC Address of the LAN interface is displayed here.

•Configuration Type. Select Static IP Address if your ISP provided you with the IP Address, Subnet Mask, and default Gateway address or Select Automatic Configuration - DHCP if your ISP assigns IP addresses via DHCP.

•IP Address. The IP address must be unique to your network. We suggest you use the default IP address of 192.168.1.245. This is a private IP address, so there is no need to purchase a separate IP address from your service provider. Verify the address and click the Apply button to save changes.

•Subnet Mask. The Access Point’s Subnet Mask (or IP Mask) must be the same as your Ethernet network. Verify this is correct and click the Apply button to set it.

•Gateway. If you have assigned a static IP address to the Access Point, then enter the IP address of your network’s Gateway, such as a router, in the Gateway field. If your network does not have a Gateway, then leave this field blank.

Figure 6-2

14

15

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Wireless-G Access Point Table of Contents Mail Connecting the Wireless-G Access Point Package ContentsSetting up the Wireless-G Access Point Ssid Instant Wireless Series Copyright & Marques DE Commerce Table des matières Étape 1 Branchement du point d’accès sans fil G Contenu de l’emballageÉtape 2 Configuration du point d’accès sans fil G Ssip WEP Copyright & Marken Inhalt Lieferumfang Schritt 1 Anschließen des Wireless-G Access PointSchritt 2 Einrichten des Wireless-G Access Point Enter Network S s w o r d Exit Copyright & Marchi Indice Contenuto della confezione Fase 1 collegamento di Wireless-G Access PointFase 2 configurazione di Wireless-G Access Point Password Dell’utilità basata sul Se è Stata immessa Una Passphrase, la chiave Direitos DE Autor E Marcas Comerciais Índice Passo 1 Ligar o Ponto de acesso sem fios-G Conteúdo da embalagemPasso 2 Configurar o Ponto de acesso sem fios-G Password Palavra Setup Wizard Assistente Copyright Y Marcas Registradas Contenido Contenido del paquete Paso 1 Conexión del punto de acceso Wireless-GPaso 2 Configuración del punto de acceso Wireless-G Ssid Siguiente Copyright 2003 Linksys, All Rights Reserved Wireless-G Access Point Latan-soporte@linksys.com Introduction Features Instant Wireless Wireless-G Access PointIntroduction Getting to Know the Wireless-G Access Point Planning Your Wireless NetworkWireless-G Access Point’s Back Panel Network TopologyWireless-G Access Point’s Front Panel Connecting Wireless-G Access PointSetting Up Wireless-G Access Point Instant Wireless Series Instant Wireless Series Instant Wireless Series Setup Tab Configuring Wireless-G Access PointWireless SETTINGThe AP ModeTHE APTabMODE Password TabStatus Tab Log Tab Filter Tab Help TabAdvanced Wireless Tab Instant Wireless Series Frequently Asked Questions Appendix a TroubleshootingDoes the Access Point function as a firewall? Setting Up TCP/IP in Windows Appendix B Setting Up the TCP/IP and IPX ProtocolsIPX Setup for Windows 98 and Millennium TCP/IP Setup for Windows 98 and MillenniumTCP/IP Setup for Windows NT IPX Setup for Windows NTIPX Setup for Windows TCP/IP Setup for WindowsTCP/IP Setup for Windows XP Appendix C Glossary Instant Wireless Series Instant Wireless Series Instant Wireless Series Environmental Appendix D SpecificationsCopyright 2003 Linksys, All Rights Reserved

WAP54G specifications

The D-Link WAP54G is a wireless access point that offers a variety of features aimed at enhancing network connectivity and performance. Designed for small to medium-sized environments, this device is an essential component for creating a reliable wireless network. With its impressive capabilities, the WAP54G easily integrates into existing networks, providing enhanced coverage and flexibility.

One of the main features of the WAP54G is its support for the IEEE 802.11g standard, which allows for data transfer rates of up to 54 Mbps. This standard is backward compatible with 802.11b devices, ensuring that users can maintain connectivity with older hardware. This level of compatibility makes the WAP54G a versatile choice for diverse networking needs.

The device is equipped with advanced security features, including WPA and WPA2 encryption protocols, ensuring that users can protect their network from unauthorized access. These security measures are essential in today’s world, where data breaches are increasingly common. Additionally, the WAP54G supports MAC address filtering, which further restricts access to only authorized devices.

For connectivity, the WAP54G includes multiple Ethernet ports, allowing it to be connected directly to a wired network. This feature enables the access point to bridge the gap between wired and wireless devices, facilitating seamless communication. Moreover, the WAP54G supports Power over Ethernet (PoE), which simplifies installation by allowing it to receive power and data through a single Ethernet cable. This is particularly beneficial in environments where power outlets are limited or difficult to access.

Another noteworthy aspect of the WAP54G is its coverage capabilities. With its adjustable antennas, users can optimize signal distribution throughout a building, overcoming common obstacles such as walls and furniture that can hinder wireless performance. The access point also boasts a user-friendly web-based interface, making it easy to configure and manage settings for both novice and experienced users alike.

In terms of reliability, the D-Link WAP54G features a solid build quality and a compact design, allowing it to fit seamlessly into various environments. The device is also equipped with LED indicators that provide real-time status updates on power, Ethernet connection, and wireless activity, enabling users to monitor their network easily.

Overall, the D-Link WAP54G is a robust wireless access point that combines speed, security, and flexibility, making it an excellent choice for enhancing network performance in both home and office settings.
Top Page Image Contents