D-Link WAP54G manual Instant Wireless Series

Page 56

Instant Wireless® Series

•Beacon Interval. This value indicates the frequency interval of the beacon. The default value is 100. Enter a value between 20 and 1000 milliseconds. The Beacon Interval value indicates the frequency interval of the beacon. A beacon is a packet broadcast by the Access Point to synchronize the wire- less network.

•RTS Threshold. This value should remain at its default setting of 2346. Should you encounter inconsistent data flow, only minor reductions are rec- ommended.

•Fragmentation Threshold. This value specifies the maximum size for a packet before data is fragmented into multiple packets. It should remain at its default setting of 2346. A smaller setting means smaller packets, which will create more packets for each transmission. Only minor reductions of this value are recommended.

•DTIM Interval. The default value is 3. This value, between 1 and 255 mil- liseconds, indicates the interval of the Delivery Traffic Indication Message (DTIM). A DTIM field is a countdown field informing clients of the next window for listening to broadcast and multicast messages. When the Access Point has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. Access Point Clients hear the beacons and awaken to receive the broadcast and multicast mes- sages.

When you’ve completed making any changes on this tab, click the Apply but- ton to save those changes or Cancel to cancel your changes. For more infor- mation on this tab, you can click the Help button.

Wireless-G Access Point

TheTheSNMPSNMPscreenTaballows you to customize the Simple Network Management

Figure 6-14

Protocol (SNMP) settings. SNMP is a popular network monitoring and man- agement protocol.

The Identification settings let you designate the Contact, Device Name, and Location information for the Access Point. The SNMP Community settings allow names to be assigned to any SNMP communities that have been set up in the network. You can define two different SNMP communities, with the default names being Public and Private.

•SNMP. To enable the SNMP support feature, select Enable. Otherwise, select Disable.

•Identification. In the Contact field, enter contact information for the Access Point. In the Device Name field, enter the name of the Access Point. In the Location field, specify the area or location where the Access Point resides.

•SNMP Community. You may change the name from its default, Public. Enter a new name in the Public field. Then configure the community's access as either Read-Only or Read-Write.You may change the name from its default, Private. Enter a new name in the Private field. Then configure the community's access as either Read-Only or Read-Write.

When you’ve completed making any changes on this tab, click the Apply but- ton to save those changes or Cancel to cancel your changes. For more infor- mation on this tab, you can click the Help button.

28

29

Page 55 Page 57
Image 56
Page 55 Page 57
Contents Wireless-G Access Point Table of Contents Mail Package Contents Connecting the Wireless-G Access PointSetting up the Wireless-G Access Point Ssid Instant Wireless Series Copyright & Marques DE Commerce Table des matières Contenu de l’emballage Étape 1 Branchement du point d’accès sans fil GÉtape 2 Configuration du point d’accès sans fil G Ssip WEP Copyright & Marken Inhalt Schritt 1 Anschließen des Wireless-G Access Point LieferumfangSchritt 2 Einrichten des Wireless-G Access Point Enter Network S s w o r d Exit Copyright & Marchi Indice Fase 1 collegamento di Wireless-G Access Point Contenuto della confezioneFase 2 configurazione di Wireless-G Access Point Password Dell’utilità basata sul Se è Stata immessa Una Passphrase, la chiave Direitos DE Autor E Marcas Comerciais Índice Conteúdo da embalagem Passo 1 Ligar o Ponto de acesso sem fios-GPasso 2 Configurar o Ponto de acesso sem fios-G Password Palavra Setup Wizard Assistente Copyright Y Marcas Registradas Contenido Paso 1 Conexión del punto de acceso Wireless-G Contenido del paquetePaso 2 Configuración del punto de acceso Wireless-G Ssid Siguiente Copyright 2003 Linksys, All Rights Reserved Wireless-G Access Point Latan-soporte@linksys.com Introduction Introduction Instant Wireless Wireless-G Access PointFeatures Planning Your Wireless Network Getting to Know the Wireless-G Access PointWireless-G Access Point’s Back Panel Network TopologyConnecting Wireless-G Access Point Wireless-G Access Point’s Front PanelSetting Up Wireless-G Access Point Instant Wireless Series Instant Wireless Series Instant Wireless Series Configuring Wireless-G Access Point Setup TabWireless Password Tab SETTINGThe AP ModeTHE APTabMODEStatus Tab Log Tab Help Tab Filter TabAdvanced Wireless Tab Instant Wireless Series Appendix a Troubleshooting Frequently Asked QuestionsDoes the Access Point function as a firewall? Appendix B Setting Up the TCP/IP and IPX Protocols Setting Up TCP/IP in WindowsTCP/IP Setup for Windows 98 and Millennium IPX Setup for Windows 98 and MillenniumTCP/IP Setup for Windows NT IPX Setup for Windows NTTCP/IP Setup for Windows XP TCP/IP Setup for WindowsIPX Setup for Windows Appendix C Glossary Instant Wireless Series Instant Wireless Series Instant Wireless Series Appendix D Specifications EnvironmentalCopyright 2003 Linksys, All Rights Reserved

WAP54G specifications

The D-Link WAP54G is a wireless access point that offers a variety of features aimed at enhancing network connectivity and performance. Designed for small to medium-sized environments, this device is an essential component for creating a reliable wireless network. With its impressive capabilities, the WAP54G easily integrates into existing networks, providing enhanced coverage and flexibility.

One of the main features of the WAP54G is its support for the IEEE 802.11g standard, which allows for data transfer rates of up to 54 Mbps. This standard is backward compatible with 802.11b devices, ensuring that users can maintain connectivity with older hardware. This level of compatibility makes the WAP54G a versatile choice for diverse networking needs.

The device is equipped with advanced security features, including WPA and WPA2 encryption protocols, ensuring that users can protect their network from unauthorized access. These security measures are essential in today’s world, where data breaches are increasingly common. Additionally, the WAP54G supports MAC address filtering, which further restricts access to only authorized devices.

For connectivity, the WAP54G includes multiple Ethernet ports, allowing it to be connected directly to a wired network. This feature enables the access point to bridge the gap between wired and wireless devices, facilitating seamless communication. Moreover, the WAP54G supports Power over Ethernet (PoE), which simplifies installation by allowing it to receive power and data through a single Ethernet cable. This is particularly beneficial in environments where power outlets are limited or difficult to access.

Another noteworthy aspect of the WAP54G is its coverage capabilities. With its adjustable antennas, users can optimize signal distribution throughout a building, overcoming common obstacles such as walls and furniture that can hinder wireless performance. The access point also boasts a user-friendly web-based interface, making it easy to configure and manage settings for both novice and experienced users alike.

In terms of reliability, the D-Link WAP54G features a solid build quality and a compact design, allowing it to fit seamlessly into various environments. The device is also equipped with LED indicators that provide real-time status updates on power, Ethernet connection, and wireless activity, enabling users to monitor their network easily.

Overall, the D-Link WAP54G is a robust wireless access point that combines speed, security, and flexibility, making it an excellent choice for enhancing network performance in both home and office settings.
Top Page Image Contents