D-Link DWL-G730AP warranty Installation Overview, AP Access Point Mode

Page 3

Installation Overview

The DWL-G730AP offers three different operation modes:

AP (Access Point Mode): In this mode, the DWL-G730AP functions as an access point.

Client (Client Mode): When Client mode is selected, the DWL-G730AP as a wireless client.

RT (Router Mode): The DWL-G730AP functions as a router when this mode is selected.

AP - Access Point Mode

When the Mode Selection Switch on the bottom of the DWL-G730AP is set to AP, the unit is in Access Point Mode. The diagram below illustrates a typical access point configuration.

Note: D-Link®AirPlus G wireless devices are pre-configured to connect together, right out of the box, using their default settings.

3

Image 3
Contents Before You Begin Rear Panel Hardware OverviewTop Panel Bottom PanelAP Access Point Mode Installation OverviewClient Client Mode RT Router Mode AP Mode Using the Setup Wizard Set Your Wireless LAN Connection Encryption Client Mode Using the Setup Wizard Client Mode Using the Setup Wizard Encryption Router Mode Using the Setup Wizard Router Mode Using the Setup Wizard Set Your Wireless LAN Connection Encryption Technical Support