D-Link DWL-G730AP warranty Client Mode Using the Setup Wizard

Client Mode - Using the Setup Wizard

To configure the DWL-G730AP in Client Mode, you will need to connect a PC directly to the DWL-G730AP using a standard Ethernet cable. You will need to assign the network adapter connecting to the DWL-G730AP an IP address in the range of 192.168.0.x.

Open your Web browser and type http://192.168.0.30 into the URL address box. Then press the Enter or Return key.

The logon pop-up screen will appear.

Type admin for the username and leave the password field blank.

Click OK

Once you have logged in, the

Home screen will appear.

Click Run Wizard

9