D-Link DWL-G730AP warranty Client Client Mode

Page 4

Installation Overview (continued)

Client - Client Mode

When the Mode Selection Switch on the bottom of the DWL-G730AP is set to Client, the unit is in Client Mode. The diagram below illustrates a typical client configuration.

Note: D-Link®AirPlus G wireless devices are pre-configured to connect together, right out of the box, using their default settings.

Image 4

Contents Before You Begin Hardware Overview Top PanelBottom Panel Rear PanelInstallation Overview AP Access Point ModeClient Client Mode RT Router Mode AP Mode Using the Setup Wizard Set Your Wireless LAN Connection Encryption Client Mode Using the Setup Wizard Client Mode Using the Setup Wizard Encryption Router Mode Using the Setup Wizard Router Mode Using the Setup Wizard Set Your Wireless LAN Connection Encryption Technical Support