D-Link DVG-1402S manual MAC Cloning For Cable Connection

Page 21

MAC Cloning For Cable Connection

Some cable Internet service providers require that device connected to the cable modem has the MAC address of the PC that was originally registered with the cable Internet provider. If this is required to set up the DVG-1402S, follow the steps below.

1.On the computer that was originally registered with your service provider.

For Windows 98/Me users: Go to Start > Run > command. Type in ipconfig/ all. The physical address listed is your system’s MAC address.

For Windows 2000/XP users: Go to Start> Run > cmd. Type in ipconfig/ all. The physical address listed is your system’s MAC address.

For Mac users: Click the Apple icon in the upper left hand corner of the screen. Go to System Preferences > Network and click on the network device you use to connect to the Internet. Click the Ethernet button. The ethernet ID listed is your system’s MAC address.

2.Write down the MAC address of your system. This address is written in the following format: 00:aa:bb:11:22:33.

3.Open a Web browser and type in the IP address of the DVG-1402S (default is 192.168.15.1). Log into the Web-based management module (see the next section for more information) and click on Configure WAN Port. The following page will appear.

4.Select DHCP from the connection type pull down menu.

5.In the MAC Cloning field, enter your system’s MAC address (from step 2).

6.Click the Save button to save your settings.

7.Mac Cloning configuration is now complete.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Link Contents Package Contents Introduction Connections Features & Benefits Leds Getting Started Connecting the DVG-1402S Directly to a Modem and ComputerGetting Started Configuring the DVG-1402S for DSL Connection Authentication Password Confirm Password Getting Started Connecting the DVG-1402S in Front of a Router Connecting the DVG-1402S in Front of a Router Configuring the DVG-1402S for DSL Connection Authentication Password Confirm Password Getting Started Connecting the DVG-1402S Behind a Router Connecting the DVG-1402S Behind a Router Getting Started MAC Cloning For Cable Connection Web-based Management Click on Configure WAN Port Click on Login to Web-based Management moduleClick on Configure LAN Port Configure LAN Port Proxy DNS Web-based Management MAC Address This specifies the physical Configure LAN Port Dhcp Configuration Static IP AssignmentConfigure LAN Port NAT Configuration Web-based Management Configure LAN Port NAT Configuration Dynamic NAT Web-based Management Configure LAN Port NAT Configuration Static NAT Configure LAN Port Routing RIP Configure LAN Port Routing Static Route ConfigurationStatic Route Configuration window Configure LAN Port RIP Static Route Configuration Firewall Rules Web-based Management MAC Filter Configure Pass Through Mode Statistics Phone Port Statistics Statistics WAN Internet Connection StatisticsConfiguration Restore and Backup Factory Reset Advanced Save and Restart SystemAbout Frequently Asked Questions Frequently Asked Questions Frequently Asked Questions Technical Specifications Power Supply Provision Light DimensionsOperating Temperature Storage TemperatureEmission EMI SafetyTechnical Support Warranty and Registration Page Important Note
Related manuals
Manual 57 pages 58.51 Kb Manual 59 pages 57.55 Kb

DVG-1402S specifications

The D-Link DVG-1402S is a versatile voice gateway designed to empower small to medium-sized businesses with seamless voice over IP (VoIP) communication. This device integrates traditional telephony with modern Internet Protocol (IP) technologies, offering a significant upgrade from conventional phone systems.

One of the main features of the DVG-1402S is its dual functionality as both a VoIP gateway and a router. It enables users to connect standard analog telephones to a VoIP network, thus converting existing telephone systems into a more cost-effective solution. This feature is particularly beneficial for businesses looking to maintain their current telephony setup while transitioning to VoIP.

Equipped with two FXS (Foreign Exchange Subscriber) ports, the DVG-1402S allows connectivity to two analog phones, ensuring that users can make and receive calls through the VoIP service without the need for additional hardware. The device supports a variety of signaling protocols, including SIP (Session Initiation Protocol), enabling compatibility with a wide range of VoIP service providers.

The DVG-1402S also boasts advanced QoS (Quality of Service) features that prioritize voice traffic over data, ensuring clear and uninterrupted voice calls even during peak internet usage. This characteristic is crucial for businesses that rely heavily on VoIP communication, as it enhances call quality and reduces latency.

In addition, the device supports multiple codecs including G.711, G.723, and G.729, providing flexibility in bandwidth usage. Users can select the codec that best fits their internet connection and call quality requirements, optimizing performance based on their specific needs.

The DVG-1402S includes an easy-to-use web-based management interface for configuration and troubleshooting, making it user-friendly for both IT professionals and average users. Furthermore, it features built-in security measures such as encryption and firewall capabilities to protect voice communications from potential threats.

In summary, the D-Link DVG-1402S is a comprehensive VoIP solution that combines functionality, performance, and ease of use. With its ability to integrate with existing telephony systems, support for various protocols and codecs, and advanced QoS features, it stands out as a reliable choice for businesses looking to enhance their communication infrastructure with VoIP technology. Its versatility makes it a valuable asset for any modern office environment.
Top Page Image Contents