D-Link DVG-1402S manual Web-based Management

Page 26

Web-based Management (continued)

Configure LAN Port > DHCP Configuration > Dynamic IP Assignment

Use the Dynamic IP

Assignment to configure the device to act as a DHCP server for the LAN.

The items on this window are described below:

Default Gateway - This specifies the Gateway IP Address that will be assigned to and used by the DHCP clients.

Start IP Address -This is the base (starting) address for the IP pool of unassigned IP addresses.

IP Range - This is the range of contiguous, IP addresses above the base IP Address above.

Netmask - This mask informs the client, how the destination IP address is to be divided into network, subnet, and host parts. The netmask has ones in the bit positions in the 32-bit address which are to be used for the network and subnet parts, and zeros for the host part.

Leased Time - This specifies the amount of time (in seconds) a client can lease an IP address, from the dynamically allocated IP pool.

DNS Server IP - This specifies the Domain Name System server, used by the DHCP clients using leased IP addresses, to translate hostnames into IP addresses or vice-versa.

WIN Server IP - Some LANs may require using WINS servers; enter the IP address of the WINS server or leave blank.

Domain Name - Enter a domain name for the network group or leave blank. State - This toggles Disable and Enable for the DHCP function.

Click Save to save the settings.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Link Contents Package Contents Introduction Connections Features & Benefits Leds Connecting the DVG-1402S Directly to a Modem and Computer Getting StartedGetting Started Configuring the DVG-1402S for DSL Connection Authentication Password Confirm Password Getting Started Connecting the DVG-1402S in Front of a Router Connecting the DVG-1402S in Front of a Router Configuring the DVG-1402S for DSL Connection Authentication Password Confirm Password Getting Started Connecting the DVG-1402S Behind a Router Connecting the DVG-1402S Behind a Router Getting Started MAC Cloning For Cable Connection Web-based Management Click on Login to Web-based Management module Click on Configure WAN PortClick on Configure LAN Port Configure LAN Port Proxy DNS Web-based Management Configure LAN Port Dhcp Configuration Static IP Assignment MAC Address This specifies the physicalConfigure LAN Port NAT Configuration Web-based Management Configure LAN Port NAT Configuration Dynamic NAT Web-based Management Configure LAN Port NAT Configuration Static NAT Static Route Configuration window Configure LAN Port Routing RIPConfigure LAN Port Routing Static Route Configuration Configure LAN Port RIP Static Route Configuration Firewall Rules Web-based Management MAC Filter Configure Pass Through Mode Statistics WAN Internet Connection Statistics Statistics Phone Port StatisticsConfiguration Restore and Backup Factory Reset Save and Restart System AdvancedAbout Frequently Asked Questions Frequently Asked Questions Frequently Asked Questions Technical Specifications Operating Temperature Provision Light DimensionsPower Supply Storage TemperatureSafety Emission EMITechnical Support Warranty and Registration Page Important Note
Related manuals
Manual 57 pages 58.51 Kb Manual 59 pages 57.55 Kb

DVG-1402S specifications

The D-Link DVG-1402S is a versatile voice gateway designed to empower small to medium-sized businesses with seamless voice over IP (VoIP) communication. This device integrates traditional telephony with modern Internet Protocol (IP) technologies, offering a significant upgrade from conventional phone systems.

One of the main features of the DVG-1402S is its dual functionality as both a VoIP gateway and a router. It enables users to connect standard analog telephones to a VoIP network, thus converting existing telephone systems into a more cost-effective solution. This feature is particularly beneficial for businesses looking to maintain their current telephony setup while transitioning to VoIP.

Equipped with two FXS (Foreign Exchange Subscriber) ports, the DVG-1402S allows connectivity to two analog phones, ensuring that users can make and receive calls through the VoIP service without the need for additional hardware. The device supports a variety of signaling protocols, including SIP (Session Initiation Protocol), enabling compatibility with a wide range of VoIP service providers.

The DVG-1402S also boasts advanced QoS (Quality of Service) features that prioritize voice traffic over data, ensuring clear and uninterrupted voice calls even during peak internet usage. This characteristic is crucial for businesses that rely heavily on VoIP communication, as it enhances call quality and reduces latency.

In addition, the device supports multiple codecs including G.711, G.723, and G.729, providing flexibility in bandwidth usage. Users can select the codec that best fits their internet connection and call quality requirements, optimizing performance based on their specific needs.

The DVG-1402S includes an easy-to-use web-based management interface for configuration and troubleshooting, making it user-friendly for both IT professionals and average users. Furthermore, it features built-in security measures such as encryption and firewall capabilities to protect voice communications from potential threats.

In summary, the D-Link DVG-1402S is a comprehensive VoIP solution that combines functionality, performance, and ease of use. With its ability to integrate with existing telephony systems, support for various protocols and codecs, and advanced QoS features, it stands out as a reliable choice for businesses looking to enhance their communication infrastructure with VoIP technology. Its versatility makes it a valuable asset for any modern office environment.
Top Page Image Contents