Configuration Guide

User’s Manaul

2.8Configuring IPS-3101h WAN IP through Voice Prompt

2.8.1DHCP Mode

Follow section 5.1 with voice menu option 01 to enable IPS-3101h to use DHCP.

2.8.2 STATIC IP Mode

Follow section 5.1 with voice menu option 01 to enable IPS-3101h to use STATIC IP mode, then use option 02, 03, 04 to set up VoIP gateway’s IP, Subnet Mask, Gateway respectively.

2.9Configuring IPS-3101h with Web Browser

IPS-3101h series ATA has an embedded Web server that will respond to HTTP GET/POST requests. It also has embedded HTML pages that allow a user to configure the VoIP gateway through a Web browser such as Microsoft’s IE and AOL’s Netscape.

2.9.1 Access the Web Configuration Menu

The IPS-3101h HTML configuration menu can be accessed via LAN or WAN port:

•From the LAN port use the default LAN gateway IP address: http:/192.168.2.1

•The WAN port HTML configuration menu option is disabled from factory. To access the HTML configuration menu from the WAN port, first enable the “WAN side HTTP access” option by accessing the configuration via LAN port.

With the WAN side HTTP access enable, then get the WAN IP address of the VoIP gateway through section 4.1 with menu option 02. Then the VoIP gateway’s Web Configuration Menu can be accessed by the following URI via WAN port:

http://VoIP gateway-IP-Address,

where the VoIP gateway-IP-Addressis the WAN IP address of the IPS-3101h.

Once this request is entered and sent from a Web browser, the IPS-3101h will respond with the following login screen:

Welcome to ArtDio IPS-3101h

Password