ArtDio IPS-3101h Configuration through a Central Server, Saving the Configuration Changes

User’s Manaul

Port Forwarding:

Allow the user to forward a matching (TCP/UDP) port to a specific LAN IP address with a specific (TCP/UDP) port.

2.9.3 Saving the Configuration Changes

Once a change is made, the user should press the “Update” button in the Configuration Menu. The IPS-3101h will then display the following screen to confirm that the changes have been saved.

ArtDio IPS-3101h Configuration Update Status

Your configuration changes have been saved.

They will take effect on next reboot.

Click to view your changes

The user is recommended to power cycle the IPS-3101h after seeing the above message.

2.9.4 Rebooting the IPS-3101h from remotely

The administrator of the IPS-3101h can remotely reboot the IPS-3101h by pressing the “Reboot” button at the bottom of the configuration menu. Once done, the following screen will be displayed to indicate that rebooting is underway.

ArtDio IPS-3101h Rebooting Status

The IPS-3101h is rebooting now...

You may relogin by clicking on the link below in 30 seconds.

Click to relogin

At this point, the user can relogin to the IPS-3101h after waiting for about 30 seconds.

2.10Configuration through a Central Server

ArtDio IPS-3101hs can be automatically configured from a central provisioning system.

The configuration file is downloaded via TFTP from the central server. A service provider or an enterprise with large deployment of IPS-3101hs can easily manage the configuration and service provisioning of individual devices remotely and automatically from a central server. GAPS uses enhanced (NAT friendly) TFTP and other communication protocols to communicate with each individual IPS-3101h even if the IPS-3101h is behind a NAT.

23