ArtDio IPS-3101h user manual User’s Manaul

Page 21

User’s Manaul

Send Flash Event

FXS Impedance

NTP server

Time Zone

Daylight Savings Time

Send Anonymous

Lock keypad update

WAN side http access

This parameter allows the user to control whether to send an SIP NOTIFY message indicating the Flash event, or just to switch to the voice channel when the user presses the Flash key.

Selects the impedance of the analog telephone connected to the Phone port.

This parameter defines the URI or IP address of the NTP server which the IPS-3101h will use to display the current date/time.

This parameter controls how the displayed date/time will be adjusted according to the specified time zone.

This parameter controls whether the displayed time will be daylight savings time or not. If set to Yes, then the displayed time will be 1 hour ahead of normal time.

If this parameter is set to “Yes”, the “From” header in outgoing INVITE message will be set to anonymous, essentially blocking the Caller ID from displaying.

If this parameter is set to “Yes”, the configuration update via keypad is disable.

If this parameter is set to “No”, the HTML configuration update via WAN port is disable.

21

Image 21
Contents ARTDio Table of Contents Welcome Installation Safety Compliances What is Included in the PackageProduct Overview Key FeaturesModel IPS-3101h Hardware SpecificationGet Familiar with Key Pad and Voice Prompt Basic OperationsCalling phone or extension numbers Make Phone CallsDirect IP calls Send and Receive Pstn Calls Through Pstn Line PortCall Features Table Call FeaturesPstn Pass Through LED Light Pattern IndicationConfiguration Guide Configuring IPS-3101h WAN IP through Voice PromptConfiguring IPS-3101h with Web Browser Configuration Menu Dhcp SIP Login ID SIP Password Advanced Options Seconds, default is 4 seconds User’s Manaul User’s Manaul SIP Info User’s Manaul DMZ IP Configuration through a Central Server Saving the Configuration ChangesRebooting the IPS-3101h from remotely Upgrade with Tftp Software UpgradeRestore Factory Default Setting