D-Link DWL-2700AP manual Using the Configuration Menu

DWL-2700AP User’s Manual Using the Configuration Menu

Using the Configuration Menu

To configure the DWL-2700AP, use a computer which is connected to the DWL-2700AP with an Ethernet cable (see the Network Layout diagram).

First, disable the Access the Internet using a proxy server function. To disable this function, go to Control Panel > Internet Options > Connections > LAN Settings and uncheck the enable box.

Start your web browser program (Internet Explorer, Netscape Navigator™).

Type the IP address and http port of the DWL-2700AP in the address field (http://192.168.0.50) and press Enter. Make sure that the IP addresses of the DWL-2700AP and your computer are in the same subnet.

After the connection is established, you will see the user identification window as shown.

Note: If you have changed the default IP address assigned to the DWL-2700AP, make sure to enter the correct IP address.

Type admin in the User Name field

Leave the Password field blank

Click OK

Note: If you have changed the password, make sure to enter the correct

D-Link Systems, Inc. 14