Using the AP Manager | |||
|
|
|
|
Device Configuration > General
Device Name(*):
IP address and Subnet Mask(*):
Gateway:
When selecting multiple devices for configuration, some options are unavailable for configuration by default as noted(*) below:
This allows you to change the device name for the selected access point. You must place a checkmark in the Device Name box to change the name. This option should only be configured when one access point is selected for configuration.
If you’ve selected one device for configuration and you want to change the IP address of the device, check the IP Address box. You ca then enter an IP address and Subnet Mask for the selected access point. This option should only be configurable when one access point is selected for configuration. To configure multiple devices with an IP address at one time, please reference the previous page.
Enter the IP address of your gateway, typically your router address.
60 |