| Using the AP Manager | |
|
|
|
Device Configuration > Filters
The following features are configurable in IEEE802.11g:
Internal Station | Enabling this allows wireless clients to communicate with each other. |
Connection: | When this option is disabled, wireless stations are not allowed to |
| exchange data through the access point. |
Broadcast from | Enabling this option allows Ethernet devices to communicate with |
Ethernet to WLAN: | wireless clients. When this option is disabled, all data from Ethernet |
| to wireless clients is blocked. Wireless devices can still send data to |
| the Ethernet devices when this is disabled. |
Access | When disabled access control is not filtered based on the MAC |
Control: | address. If Accept or Reject is selected, then a box appears for |
| entering MAC addresses. When Accept is selected, only devices |
| with a MAC address in the list are granted access. When Reject |
| is selected, devices in the list of MAC addresses are not granted |
| access. |
Access |
|
Control List: | Add or Delete MAC addresses in the Access Control List. |
|
|
|
|
72 |