D-Link DSL-564T manual Network Connections, Connect Adsl Line, Connect Router to Ethernet

Page 19

DSL-564T ADSL Router User’s Guide

Network Connections

Network connections are provided through the ADSL port and the four Ethernet ports on the back of the Router. See the Rear Panel diagram above and the illustrations below for examples.

Connect ADSL Line

Use the ADSL cable included with the Router to connect it to a telephone wall socket or receptacle. Plug one end of the cable into the ADSL port (RJ-11 receptacle) on the rear panel of the Router and insert the other end into the RJ-11 wall socket. If you are using a low pass filter device, follow the instructions included with the device or given to you by your service provider. The ADSL connection represents the WAN interface, the connection to the Internet. It is the physical link to the service provider’s network backbone and ultimately to the Internet.

Connect Router to Ethernet

The Router may be connected to a single computer or Ethernet device through the 10BASE-TX Ethernet port on the rear panel. Any connection to an Ethernet concentrating device such as a switch or hub must operate at a speed of 10/100 Mbps only. When connecting the Router to any Ethernet device that is capable of operating at speeds higher than 10Mbps, be sure that the device has auto-negotiation (NWay) enabled for the connecting port.

Use standard twisted-pair cable with RJ-45 connectors. The RJ-45 port on the Router is a crossed port (MDI-X). Follow standard Ethernet guidelines when deciding what type of cable to use to make this connection. When connecting the Router directly to a PC or server use a normal straight-through cable. You should use a crossed cable when connecting the Router to a normal (MDI-X) port on a switch or hub. Use a normal straight-through cable when connecting it to an uplink (MDI-II) port on a hub or switch.

The rules governing Ethernet cable lengths apply to the LAN to Router connection. Be sure that the cable connecting the LAN to the Router does not exceed 100 meters.

Hub or Switch to Router Connection

Connect the Router to an uplink port on an Ethernet hub or switch with a straight-through cable as shown in the diagram below:

If you wish to reserve the uplink port on the switch or hub for another device, connect to any on the other MDI-X ports (1x, 2x, etc.) with a crossed cable.

7

Image 19
Contents DSL-564T Adsl Router User’s Guide FCC Warning DSL-564T DSL Router User’s GuideWarranties Exclusive Wichtige SicherheitshinweiseSoftware HardwareWarranty and Registration Information for USA Only DSL-564T DSL Router User’s Guide Table of Contents Status Menus About This User’s Guide Installation RequirementsBefore You Start Additional Software Ethernet Port NIC AdapterAbout Clip Connections RFC Information you will need from your Adsl service provider Information you will need about your LAN or computer Router Description and Operation What is ADSL?Router Features Standards Compatibility and Compliance Packing List Front Panel DisplayRear Panel Connections Factory Reset Button Power on RouterConnect Router to Ethernet Hub or Switch to Router ConnectionNetwork Connections Connect Adsl LineComputer to Router Connection Wan Configuration Summary Configuring IP Settings on Your ComputerConfigure Windows XP for Dhcp DSL-564T Adsl Router User’s Guide Windows Configure Windows 2000 for DhcpWindows ME Configure Windows ME for DhcpWindows 95 and Windows Configure Windows NT 4.0 for Dhcp Configure Windows 95 and Windows 98 for DhcpWindows NT 4.0 Workstations Login to Home Access the Configuration ManagerHome Status Information window Configure the RouterOpening Setup window Setup MenuDSL Modulation Settings Configure Connection 1 for PPPoAPPPoA Connection 1 Setup menu Change the Connection Type Configure Connection 1 for PPPoESetup Configure Connection 1 for PPPoE Setup Configure Connection 1 for Bridge Configure Connection 1 for BridgeSetup Configure Connection 1 for Static IP for the WAN Configure Connection 1 for Static IP for WANDSL-564T Adsl Router User’s Guide Setup Configure Connection 1 for Dhcp service for the WAN Configure Connection 1 for Dhcp for WAN10. Setup Configure Connection 1 for Clip IPoA Configure Connection 1 for ClipCreate a New Connection New Connection Example 1 Create a New PPPoE Connection 11. Setup a New Connection ConnectionNew Connection Example 2 Create a New Bridge Connection 12. Setup a New Connection ConnectionLease Time Dhcp Configuration for LANDhcp Parameter Description Start IP End IP14. Configure Dhcp Relay Service Enable Dhcp RelayManagement IP 15. Configure Management IP16. Router Tools Menus Save Configuration Changes18. Changes permanently saved message Advanced Router Management Advanced UPnP window UPnPLAN Clients LAN Clients SetupAdvanced Port Forwarding window Port ForwardingServers Category Available Rules GamesAudio/Video ApplicationsSet up Custom Port Forwarding Rules Port Forwarding User Rules Management Access Control menu Access ControlVPN Advanced Security Enable/Disable NAT and FirewallBridge Filters Setup Remote ManagementDMZ IP Address 10. Multicast pass-through menu Multicast Pass-through11. Static Routing menu Static Routing12. Dynamic Routing RIP menu Dynamic RoutingMultiple Virtual Connections 13. Tools and utility menu links Tools and Utility Menus14. User Management menu User Management15. Tools System Commands menu System Commands16. Remote Log menu Remote Log17. Tools Update Gateway window Update Gateway18. Tools Ping Test window Ping Test19. Tools Modem Test window Modem Test20. Status display links Status Menus21. Network Statistics window Network StatisticsDhcp Clients Connection StatusProduct Information Modem StatusHelp Menu System LogRate StandardsProtocols Data TransferCE Class B, FCC Class B Part Physical and EnvironmentalAssigning Network IP Addresses Using the Default IP AddressManual IP Address Assignment IP Setup Example #2 Using DhcpChanging the IP Address of the Router IP Addresses IP ConceptsClass Beginning Address Ending Address IP Network ClassesIP Class Subnet Mask Subnet MaskMicrofilters Microfilter InstallationLine Splitter Line Splitter InstallationEast Chang An Ave., Dong Cheng District TEL 27-12-665-2165 FAX 2F, No , Pao-chung Road, Hsin-tien, Taipei, Taiwan Registration Card