D-Link DVA-G3340S manual User Name, Password, Connection Type

you will not be able to use the features configured in the Firewall and Filters menus located in the Advanced tab. See the next chapter for more details on these menus.

10.Typically the global IP settings (i.e. IP address for the WAN interface) for a PPPoA or PPPoA connection will use Dynamic IP assignment from the ISP. Some accounts may be assigned a specific global IP address. If you have been give an IP address for you PPPoE/PPPoA connection, select the Static IP option from the IP Control pull-down menu. This menu can be used to configure the WAN port as an Unnumbered IP interface. (See table below for Unnumbered IP)

11.Most users will not need to change ATM settings. If this is the first time you are setting up the ADSL connection it is recommended that you leave the Service Category settings at the default values until you have established the connection. See the table on page 29 for a description of the parameters available for ATM traffic shaping.

12.When you are satisfied that all the WAN settings are configured correctly, click on the Apply button.

13.The new settings must be saved and the Router must be restarted for the settings to take effect. To Save & Reboot the Router, click on the Tools directory tab and then click the System menu button. In the System menu, click the Save & Reboot button under Save Settings and Reboot the System. The Router will save the new settings and restart. Upon restarting the Router will automatically establish the WAN connection.

Additional settings for PPPoE/PPPoA connections:

PPPoE/PPPoA Parameters	Description
	For PPP connections, a User Name and Password are
	used to identify and verify your account to the ISP.
User Name	Enter the User Name for your ADSL service account.
	User names and passwords are case-sensitive, so
	enter this information exactly as given to you by
	your ISP.
	Together with the User Name, this is used to verify
Password	your account to the ISP. Enter the Password exactly
	as given to you by your ISP.
	This specifies the protocol (PPPoE or PPPoA) and the
Connection Type	encapsulation method (LLC or VC-MUX) used for
	your connection. The options available are PPPoE
	LLC, PPPoA LLC or PPPoA VC-MUX.

DVA-G3340S User Manual Page 18 of 94 V1.00 AU