NETGEAR wn3000rp, WN3000RP-100NAS user manual Status Screen

Page 19

Universal WiFi Range Extender WN3000RP

-IP Address. The static IP address.

-IP Subnet Mask. The subnet mask associated with the IP address.

-Gateway IP Address. The IP address for the gateway.

-Primary DNS. The primary domain name server (DNS).

-Secondary DNS. The secondary domain name server (DNS).

Status Screen

When you connect to http://www.mywifiext.net, after the automatic firmware check, the Status screen displays. You can also select Status from the menu to display this screen:

This screen shows the current settings and the status of your Extender.

You can click Show Statistics to see device performance statistics such as the number of packets sent and number of packets received for each port. See Show Statistics on page 20.

Hardware and Firmware Version. The model of the hardware and the currently running firmware version.

GUI Language Version. The currently selected language.

Connection Status to Existing Network

Name (SSID). Your Extender is set up to connect to this SSID, also called the wireless name.

Connection Status. The status of your wireless connection (connected or disconnected).

Link Rate. The actual transmission (Tx) and receive (Rx) link rate in the current wireless connection.

Extender Network Settings

19

Image 19
Contents Universal WiFi Range Extender WN3000RP Trademarks Technical SupportStatement of Conditions Table of Contents Getting Started Extender Hardware FeaturesHow the Extender Works When to Use Your ExtenderTo improve the Link Rate LED from red or amber to green Positioning Your ExtenderLog In to the Extender Connect a PC to the Extender with an Ethernet CableUse the Smart Wizard to Set Up the Extender After installation, to use the Smart Wizard again Universal WiFi Range Extender WN3000RP Click Continue Extender Network Settings Connect the Extender to an Existing Network Use WPS to Add a PC to the Extender’s Wireless NetworkTo log in to the Extender and use WPS to connect  To use the Extender WPS button to connectPush Button recommended . Either click To change the wireless settings for the extender’s network Extender Wireless SettingsSet Up WEP Set Up WPA, WPA2, or WPA + WPA2 Extender IP Address SetupTo set up WPA or WPA2 in the Extender Status Screen Field Description Show StatisticsAttached Devices Back Up and Manage Extender Settings Restore Settings Back Up SettingsErase the Settings Upgrade the Firmware Set the PasswordTo check for firmware and upgrade if it is available To view or change the advanced wireless settings Advanced Wireless SettingsSmart Wizard FAQs TroubleshootingConnection was not established to the selected network Joining Wireless NetworksSupplemental Information Factory SettingsTechnical Specifications Technical SpecificationsFCC Requirements for Operation in the United States Regulatory Compliance InformationEurope EU Declaration of Conformity Universal WiFi Range Extender WN3000RP FCC CautionPertinentes de la directive 1999/5/CE Interference Reduction Table Interference Reduction Table
Related manuals
Manual 32 pages 34.81 Kb Manual 36 pages 21.79 Kb