NETGEAR WN3000RP-100NAS, wn3000rp user manual Show Statistics, Field Description

Page 20

Universal WiFi Range Extender WN3000RP

Extender IP Info

MAC Address. The physical address of the Extender, as seen from the local area network (LAN).

IP Address. The IP address of the Extender. The default is 192.168.1.250.

DHCP Client. Identifies the network DHCP client on the wireless network.

IP Subnet Mask. The IP subnet mask associated with the LAN IP address of the Extender. The default is 255.255.255.0.

Gateway IP Address. he IP address of the wireless network gateway.

Domain Name Server. The IP address of the Domain Name Server (DNS) of the wireless network.

Extender Wireless Settings

Name (SSID). the name (SSID) of the wireless network.

Region. The country where the Extender is set up for use.

Channel. The current channel, which determines the operating frequency.

Wireless AP. Indicates if the access point (AP) feature is enabled.

Broadcast Name. Indicates if the Extender is configured to broadcast its SSID.

Wi-Fi Protected Setup. This indicates whether Wi-Fi Protected Setup is configured.

Show Statistics

On the Device Status screen, click Show Statistics to display the following screen:

Table 1. Show Statistics Fields

 

Field

Description

 

 

 

 

 

 

LAN or WLAN (Port)

The statistics for the LAN (local), and wireless LAN (WLAN) ports. For each

 

 

 

port, the screen displays the following:

 

 

 

 

 

 

Status

The link status of the port.

 

 

 

 

 

 

TxPkts

The number of packets transmitted on this port since reset or manual clear.

 

 

 

 

 

 

RxPkts

The number of packets received on this port since reset or manual clear.

 

 

 

 

 

 

 

 

 

 

 

Extender Network Settings

20

Image 20
Contents Universal WiFi Range Extender WN3000RP Statement of Conditions Technical SupportTrademarks Table of Contents Getting Started Hardware Features ExtenderWhen to Use Your Extender How the Extender WorksPositioning Your Extender To improve the Link Rate LED from red or amber to greenConnect a PC to the Extender with an Ethernet Cable Log In to the ExtenderUse the Smart Wizard to Set Up the Extender After installation, to use the Smart Wizard again Universal WiFi Range Extender WN3000RP Click Continue Extender Network Settings Use WPS to Add a PC to the Extender’s Wireless Network Connect the Extender to an Existing NetworkPush Button recommended . Either click  To use the Extender WPS button to connectTo log in to the Extender and use WPS to connect Extender Wireless Settings To change the wireless settings for the extender’s networkSet Up WEP To set up WPA or WPA2 in the Extender Extender IP Address SetupSet Up WPA, WPA2, or WPA + WPA2 Status Screen Show Statistics Field DescriptionAttached Devices Back Up and Manage Extender Settings Erase the Settings Back Up SettingsRestore Settings To check for firmware and upgrade if it is available Set the PasswordUpgrade the Firmware Advanced Wireless Settings To view or change the advanced wireless settingsTroubleshooting Smart Wizard FAQsJoining Wireless Networks Connection was not established to the selected networkFactory Settings Supplemental InformationTechnical Specifications Technical SpecificationsRegulatory Compliance Information FCC Requirements for Operation in the United StatesUniversal WiFi Range Extender WN3000RP FCC Caution Europe EU Declaration of ConformityPertinentes de la directive 1999/5/CE Interference Reduction Table Interference Reduction Table
Related manuals
Manual 32 pages 34.81 Kb Manual 36 pages 21.79 Kb