American Power Conversion 3-in-1 Wireless Mobile Router user manual Connection Status L2TP Screen

Page 41

The Ethernet (WAN) Port Status

Connection Status - L2TP Screen

If using L2TP, a screen similar to the following is displayed when the Status button is clicked.

Figure 22. The L2TP Status Screen

The following table describes the fields on the L2TP Screen.

Connection

Physical Address	The hardware address of this device, as seen by remote devices on the Internet. (This is different from
	the hardware address seen by devices on the local LAN.)
IP Address	The IP Address of this device, as seen from the Ethernet (WAN) Port interface. If using DHCP, and
	there is no current connection, this field will be blank or display 0.0.0.0.
Connection Status	Indicates whether or not the connection is currently established.
	If the connection does not exist, the Connect button can be used to establish a connection.

If the connection currently exists, the Disconnect button can be used to break the connection.

Connection Log

Connection Log	The Connection Log shows status messages relating to the existing connection.
	The most common messages are listed in the section “The following table describes the Connection
	Log Messages..”
	The Clear Log button will restart the log, while the Refresh button will update the messages shown on
	screen.
Buttons
Clear Log	Deletes all data currently in the log, making it easier to read new messages.
Connect	If not connected, establishes a connection to the ISP.
Disconnect	If connected to the ISP, hangs up the connection.
Refresh	Updates the data on screen.

4-15

Image 41

Contents User’s Manual Page Contents AP/Router Mode Advanced Features Configuring the Router for AP/Router ModeConfiguring the Router for Client Mode Operation and UsageAppendix A. Troubleshooting and Maintenance A-1 List of Figures Preface Contents of this ManualIntended Audience Conventions and Typefaces Used in This ManualCompliance Statement Regulatory ApprovalsDisclaimers TrademarksWireless FeaturesRouter Mode Features IntroductionPhysical Features Package ContentsModes Feature FunctionalityAP/Router Mode Access Point AP ModeClient Mode Config ModeModes Requirements Initial ConfigurationHow to Perform the Initial Configuration Mode Configuration Screen Admin Using The System Setup ScreenSystem Using The Config File ScreenUpgrading the Firmware Upgrade Firmware ScreenUpgrading the Firmware Connecting the Router to a Wired or Wireless Network Configuring the Router for Access Point AP ModeUsing the Wireless Security Screen WirelessWireless Security WEP Screen Wireless Security WPA-PSK Screen Using the Trusted Wireless Stations ScreenClear EditAdd Using the Trusted Wireless Stations Screen Connecting in AP/Router Mode Configuring the Router for AP/Router ModeAP/Router Setup Screen Using the AP/Router Setup ScreenEthernet WAN Port Wireless LANSecurity System WEP Wireless Security ScreenSecurity System WPA-PSK Buttons Trusted Wireless Stations ScreenConnection Type Travel Mode Hotel Ethernet WAN Port Configuration ScreenConnection Type IP AddressIdentification Connection Types PPPoE, PPTP, L2TP, and No LoginMAC Address Connection Behavior Ethernet Port Configuration All SettingsEthernet WAN Port Configuration Screen Fixed/Dynamic IP Address Ethernet WAN Port StatusInternet Connection Log ConnectionMessage Description Pptp Status Screen Pptp StatusL2TP Status Screen Connection Status L2TP ScreenEthernet WAN Port Status Advanced Internet Screen AP/Router Mode Advanced FeaturesCommunication Applications Communication ApplicationsPort Forwarding Enable DMZ usingSend Application’s incoming calls to My PC is not listedPort Forwarding IP Address Seen by Internet UsersProperties ServicePort Forwarding Screen Connecting to User-defined Servers Using Self-defined ServersCreate a new Server Modify Edit a ServerDdns Screen Using Dynamic DNS Domain Name ServerDdns Data Ddns ServiceDNS Lookup Network Diagnostics ScreenPing Backup DNS IP Backup DNSEnable UPnP Services Options ScreenAdvanced PC Database Screen Advanced PC Database ScreenPC Properties Options Security ScreenFirewall Allow L2TP Allow PptpSecurity Screen Connecting the Computer to the Router Configuring the Router for Client ModeSet as Current Client Mode Setup ScreenWireless Profiles General Wireless Client Profile ScreenProfile Name Network TypeSecurity Sytem SecurityOperation and Usage When Changing ModesUsing AP Mode Connecting in AP/Router Mode Using AP/Router ModeAP/Router Setup Screen annotated Using Client Mode General Problems Appendix a Troubleshooting and MaintenanceWireless Access AP or AP/Router Mode SolutionProblem 3 The wireless connections speed is very slow Router ModeBasic Service Set BSS and Extended Service Set ESS Appendix B About Wireless LANsModes for Wireless LANs Open System or Shared Key Wired Equivalent Privacy WEPOff, 64 Bit, 128 Bit Wireless Interface Specifications Appendix C SpecificationsTechnical Support Warranty