American Power Conversion 3-in-1 Wireless Mobile Router Network Diagnostics Screen, Ping

Page 50

The Network Diagnostics Screen

The Network Diagnostics Screen

Use this screen to perform a Ping or a DNS lookup. These activities can be useful in solving network problems.

		Figure 27. The Network Diagnostics Screen
The following table describes the fields on the Network Diagnostics screen.

	Ping
	Ping this	Enter the IP address to ping. The IP address can be on the LAN or on the Internet. Note that if the
	IP Address	address is on the Internet, and no connection currently exists, a “Timeout” error may result. In this case,
		wait a few seconds and try again.
	Ping Button	After entering the IP address, click this button to start the Ping procedure. The results will be displayed
		in the Ping Results window.
	DNS Lookup
	Domain	Enter the domain name or URL that needs a DNS (Domain Name Server) lookup. Note that if the
	name/URL	address is on the Internet, and no connection currently exists, a “Timeout” error may result. In this case,
		wait a few seconds and try again.
	DNS Lookup But-	After entering the domain name/URL, click this button to start the DNS Lookup procedure. The results
	ton	will be displayed in the DNS Lookup Results window.

5-8

Image 50

Contents User’s Manual Page Contents Configuring the Router for Client Mode Configuring the Router for AP/Router ModeAP/Router Mode Advanced Features Operation and UsageAppendix A. Troubleshooting and Maintenance A-1 List of Figures Intended Audience Contents of this ManualPreface Conventions and Typefaces Used in This ManualDisclaimers Regulatory ApprovalsCompliance Statement TrademarksRouter Mode Features FeaturesWireless IntroductionPackage Contents Physical FeaturesFeature Functionality ModesAccess Point AP Mode AP/Router ModeConfig Mode Client ModeModes Requirements Initial ConfigurationHow to Perform the Initial Configuration Mode Configuration Screen Using The System Setup Screen AdminUsing The Config File Screen SystemUpgrade Firmware Screen Upgrading the FirmwareUpgrading the Firmware Configuring the Router for Access Point AP Mode Connecting the Router to a Wired or Wireless NetworkWireless Using the Wireless Security ScreenWireless Security WEP Screen Using the Trusted Wireless Stations Screen Wireless Security WPA-PSK ScreenClear EditAdd Using the Trusted Wireless Stations Screen Configuring the Router for AP/Router Mode Connecting in AP/Router ModeUsing the AP/Router Setup Screen AP/Router Setup ScreenWireless LAN Ethernet WAN PortWireless Security Screen Security System WEPSecurity System WPA-PSK Trusted Wireless Stations Screen ButtonsConnection Type Ethernet WAN Port Configuration ScreenConnection Type Travel Mode Hotel IP AddressIdentification Connection Types PPPoE, PPTP, L2TP, and No LoginMAC Address Ethernet Port Configuration All Settings Connection BehaviorEthernet WAN Port Configuration Screen Fixed/Dynamic IP Address Ethernet WAN Port StatusInternet Connection Connection LogMessage Description Pptp Status Pptp Status ScreenConnection Status L2TP Screen L2TP Status ScreenEthernet WAN Port Status Communication Applications AP/Router Mode Advanced FeaturesAdvanced Internet Screen Communication ApplicationsSend Application’s incoming calls to Enable DMZ usingPort Forwarding My PC is not listedIP Address Seen by Internet Users Port ForwardingProperties ServicePort Forwarding Screen Create a new Server Using Self-defined ServersConnecting to User-defined Servers Modify Edit a ServerUsing Dynamic DNS Domain Name Server Ddns ScreenDdns Service Ddns DataDNS Lookup Network Diagnostics ScreenPing Enable UPnP Services Backup DNSBackup DNS IP Options ScreenAdvanced PC Database Screen Advanced PC Database ScreenPC Properties Options Security ScreenFirewall Allow Pptp Allow L2TPSecurity Screen Configuring the Router for Client Mode Connecting the Computer to the RouterSet as Current Client Mode Setup ScreenWireless Profiles Profile Name Wireless Client Profile ScreenGeneral Network TypeSecurity Security SytemOperation and Usage When Changing ModesUsing AP Mode Using AP/Router Mode Connecting in AP/Router ModeAP/Router Setup Screen annotated Using Client Mode Wireless Access AP or AP/Router Mode Appendix a Troubleshooting and MaintenanceGeneral Problems SolutionRouter Mode Problem 3 The wireless connections speed is very slowBasic Service Set BSS and Extended Service Set ESS Appendix B About Wireless LANsModes for Wireless LANs Open System or Shared Key Wired Equivalent Privacy WEPOff, 64 Bit, 128 Bit Appendix C Specifications Wireless Interface SpecificationsWarranty Technical Support