Reference Manual for Cable/DSL Wireless Router WGR614
•Enter your Account Name (may also be called Host Name) and Domain Name. These parameters may be necessary to access your ISP’s services such as mail or news servers. If you leave the Domain Name field blank, the router try to discover the domain. Otherwise, you may need to enter it manually.
•If you know that your ISP does not automatically transmit DNS addresses to the router during login, select Use these DNS servers and enter the IP address of your ISP’s Primary DNS Server. If a Secondary DNS Server address is available, enter it also.
Note: If you enter DNS addresses, restart your computers so that these settings take effect.
•Click Apply to save your settings.
•Click Test to test your Internet connection. If the NETGEAR website does not appear within one minute, refer to Chapter 7, “Troubleshooting.”
Fixed IP Account Smart Wizard-Detected Option
If the Setup Wizard discovers that your ISP uses Fixed IP assignment, you will see this menu:
Figure 2-10: Setup Smart Wizard menu for Fixed IP address accounts
•Fixed IP is also called Static IP. Enter your assigned IP Address, Subnet Mask, and the IP Address of your ISP’s gateway router. This information should have been provided to you by your ISP. Refer to the configuration parameters from your ISP you recorded in “Record Your Internet Connection Information” on page
•Enter the IP address of your ISP’s Primary and Secondary DNS Server addresses. Note: Restart the computers on your network so that these settings take effect.
•Click Apply to save the settings.
Connecting the Router to the Internet |