Reference Manual for the Model RP614 Web Safe Router
A DNS server is a host on the Internet that translates Internet names (such as www addresses) to numeric IP addresses. Typically your ISP transfers the IP addresses of one or two DNS servers to your router during login. If the ISP does not transfer an address, you must obtain it from the ISP and enter it manually here. If you enter an address here, you should reboot your PCs after configuring the router.
3.Click on Apply, then proceed to “Completing the Configuration“ on page
Configuring for an Account with Login
If the Setup Wizard determines that your Internet service account uses a login protocol such as
PPPover Ethernet (PPPoE), you will be directed to a menu like the PPPoE menu shown in Figure
Figure 4-5. Setup Wizard menu for PPPoE login accounts
1.Enter your Account Name (may also be called Host Name) and Domain Name. These parameters may be necessary to access your ISP’s services such as mail or news servers. If you leave the Domain Name field blank, the router will attempt to learn the domain automatically from the ISP. If this is not successful, you will need to enter it manually.
2.Enter the PPPoE login user name and password provided by your ISP. These fields are case sensitive. If you wish to change the login timeout, enter a new value in minutes.
Basic Configuration of the Router |