Installing the Hardware, Rear Panel

Rear Panel

Refer to this diagram to identify all the ports on the router when you attempt to make any connections.

Rear Panel of the Model RT338 Router

AC adapter outlet

ISDN port

POWER

LAN

12VDC

ISDN

MANAGER

PHONE 1 PHONE 2

LAN port

Power switch

RS-232 Manager port

Phone ports

9535FA

Installing the Hardware

Refer to the following illustration and steps when connecting the router.

Installing the Model RT338 Router

ISDN wall connection

POWER

LAN

12VDC

ISDN

MANAGER				PHONE 1 PHONE 2

PCs

or hubs

AC power adapter

	Phone or other
	analog devices
Network	Phone or other
manager	analog devices
(optional)

9536FA

To connect your router:

1.Connect your PC or hub to the LAN port:

•Use the red crossover cable included to connect the router directly to a PC.

•Use the white straight-through cable included to connect the router to a 10 Mbps or 100 Mbps hub or switch port. The router will sense the speed of the connected port and will automatically set its speed

to match.

Note: If you are using a 100 Mbps Fast Ethernet network or a mixed 10 Mbps/100 Mbps network, use Category 5 cabling (included).

Model RT338 ISDN Router Installation Guide