USER’S GUIDE network management card
®
Link-RX/TX (10/100) LED
This LED indicates the network status.
Condition | Description |
|
|
Off | Either the Management Card is receiving no network traffic, or the |
| device which connects the Management Card to the network is |
| turned off or not operating correctly. |
|
|
Flashing Green | The Management Card is receiving data packets from the network |
| at 10 Megabits per second (Mbps). |
|
|
Flashing Orange | The Management Card is receiving data packets from the network |
| at 100 Megabits per second (Mbps). |
|
|
Status LEDs
These LEDs indicate the Management Card’s status.
Condition | Description |
|
|
Off | The Management Card has no power. |
|
|
Solid Green | The Management Card has valid TCP/IP settings. |
|
|
Flashing Green | The Management Card does not have valid TCP/IP settings.1 |
|
|
Solid Orange | A hardware failure has been detected in the Management Card. |
| Contact APC Worldwide Customer Support. |
|
|
Flashing Orange | The Management Card is making BOOTP2 requests. |
|
|
1.If you do not use a BOOTP server, see the Network Management Card
2.To use a BOOTP server, see the Management Card Addendum (.\doc\Addendum.pdf) on the APC Network Management Card utility CD.
6