APC ADSL 4-Port manual Ethernet Switch Configuration, Application UPnP

ADSL 4-Port Ethernet USB Wireless-G Router User Guide

5.6.7Ethernet Switch Configuration

The IGMP Snooping prevents the switch from flooding the LAN ports with multicast frames, and will instead direct them to the CPU port for processing. Users are able to specify connection speed and set their values accordingly from the following available options. See Fig 1-25.

•Auto

•10/Half Duplex

•10/Full Duplex

•100/Half Duplex

•100/Full Duplex

Figure 1-25 : Ethernet Switch Configuration

5.6.8Application (UPnP)

UPnP NAT and Firewall Traversal allow traffic to pass-thru the ADSL Router for applications using the UPnP protocol. This feature requires one active DSL connection. In presence of multiple DSL connections, select the one over, which the incoming traffic will be present, for example the default Internet connection.

To enable UPnP, you must first have a WAN connection configured. Once a WAN connection is configured, click Advanced and under Advanced, select UPnP. You must enable UPnP and then select which connection will utilize UPnP. In this case the PPPoA connection is enabled. See Fig 1-26.

ADSL 4-Port Ethernet USB Wireless-G Router User Guide Page 30 of 52