APC ADSL 4-Port manual Setting Up the Adsl Router, Logging into your Adsl Router

ADSL 4-Port Ethernet USB Wireless-G Router User Guide

Chapter 5 - Setting Up the ADSL Router

The basic tabs consist of features which are catered for basic users.

This section will guide you through your ADSL Router’s configuration. The ADSL Router is shipped with a standard PPP configuration..

5.1Logging into your ADSL Router

To configure your ADSL Router, open your web browser. You may get an error message at this point; this is normal.

1.Type the default IP address (192.168.1.1) or login.router on on the web address bar.

2.Press the Enter key and the following screen will appear.

Note…

Before setting up your ADSL Router, make sure you have followed the easy start guide. You should have your computers configured for DHCP mode and have proxies disabled on your browser. Upon accessing the ADSL Router, if the browser still displays a login redirection screen, you should check your browser's setting and ensure that the JavaScript support is enabled. If the screen shown in Figure 1-3 is not attainable, you must delete your temporary Internet files to clear the web cache.

Upon entering the default IP address or the short-cut name (login.router), if the user is first time login, the user will be brought to the “Setup Wizard” page. See Fig 1.5

Figure 1-5 : Setup Page

ADSL 4-Port Ethernet USB Wireless-G Router User Guide Page 15 of 52