Using AP/Router Mode

Figure 34. The AP/Router Setup Screen (annotated)

4.Check the Ethernet (WAN) port status and settings.

If the APC 3-in-1 Wireless Mobile Router has not obtained a valid IP address — click the Configure button and change the settings as required. Check with the LAN administrator, if necessary, to determine the correct settings.

If the LAN/WAN is using the same IP address range as the Wireless LAN — change the wireless LAN AP/Router IP address to use a different address range.

If the connection is working, but some applications do not function correctly — it may be necessary to change some Advanced settings. See Chapter 5, “AP/Router Mode - Advanced Features” for information about Advanced settings.

7-3

Page 63
Image 63
American Power Conversion 3-in-1 Wireless Mobile Router user manual AP/Router Setup Screen annotated