Manuals / Brands / Computer Equipment / Network Router / American Power Conversion / Computer Equipment / Network Router

American Power Conversion 3-in-1 Wireless Mobile Router IP Address, DNS, MAC Address

1 70

Download 70 pages, 3.71 Mb

The Ethernet (WAN) Port Configuration Screen

4-10

IP Address

IP Address is

assigned

automatically

Also called Dynamic IP Address. This is the default, and the most common.

Only change this if advised to do so by the person or organization providing the LAN/WAN port

connection.

Specified

IP Address

Also called a Static IP Address. If this option is selected, the following data must be entered.

•IP Address - The IP address on the LAN or WAN.

•Network Mask - The subnet mask associated with the IP address above.

•Gateway - The address of the router or gateway on the LAN or WAN that the user is connecting to.

Note:If using PPPoE, enter only the IP Address.

DNS

Automatically

obtain from Server

The DNS (Domain Name Server) address is normally obtained automatically from the DHCP Server

which provides the IP address.

Note:This opti on cannot be used with a fixed IP address, since no server is used.

Use this DNS If this option is selected, enter the IP address of the DNS (Domain Name Server) to use.

Note:Select this option when using a Specified (Static) IP address.

MAC Address

MAC Address Also called Network Adapter Address or Physical Address. This is a low-level network identifier, as

seen from the WAN port.

Normally there is no need to change this field, but if necessary, use the Copy from PC button to copy

the computer's address into this field. This is only necessary if the computer’s MAC address has been

recorded.

Use the Default button to insert the default value, or enter a value directly, if desired.

Note:To avoid problems regarding the MAC a ddress, do NOT swap the LAN/WAN connection

from the computer to the APC 3-in-1 Wireless Mobile Router, or from the APC 3-in-1

Wireless Mobile Router to the computer.

Contents

Main Page Contents Chapter 1: Introduction 1 Chapter 2: The Initial Configuration 1 Chapter 3: Configuring the Router for Access Point (AP) Mode 3-1 Chapter 4: Configuring the Router for AP/Router Mode 4-1 Chapter 5: AP/Router Mode - Advanced Features 5-1 Chapter 6: Configuring the Router for Client Mode 6-1 Chapter 7: Operation and Usage 7-1 APPENDIX A. TROUBLESHOOTING AND MAINTENANCE A-1 APPENDIX B. ABOUT WIRELESS LANS B-1 APPENDIX C. SPECIFICATIONS C-1 Page Preface Intended Audience Contents of this Manual Conventions and Typefaces Used in This Manual Copyright Page Chapter 1: Introduction Features Package Contents Physical Features Modes Feature Functionality Access Point (AP) Mode AP/Router Mode Config Mode Client Mode Page Chapter 2: The Initial Configuration Requirements How to Perform the Initial Configuration Page Using The System Setup Screen Admin Using The Config File Screen System Upgrading the Firmware Page Chapter 3: Configuring the Router for Access Point (AP) Mode Connecting the Router to a Wired or Wireless Network Using the Wireless Security Screen Wireless The Wireless Security (WEP) Screen The Wireless Security (WPA-PSK) Screen Using the Trusted Wireless Stations Screen Page Page Chapter 4: Configuring the Router for AP/Router Mode Connecting in AP/Router Mode Using the AP/Router Setup Screen Wireless Ethernet (WAN) Port Wireless LAN The Wireless Security Screen Security System: WEP Security System: WPA-PSK The Trusted Wireless Stations Screen The Ethernet (WAN) Port Configuration Screen Connection Type: Travel Mode (Hotel) Connection Type IP Address DNS MAC Address Identification Connection Type IP Address DNS MAC Address The Ethernet (WAN) Port Status Fixed/Dynamic IP Address Internet Connection Status - PPPoE (Point-to-Point Protocol over Ethernet) Screen Message Description Connection Status - PPTP (Point-to-Point Tunneling Protocol) Screen Connection Status - L2TP Screen Page Chapter 5: AP/Router Mode - Advanced Features The Advanced Internet Screen Communication Applications Communication Applications Port Forwarding DMZ MTU Page The Port Forwarding Screen Service Properties Using Self-defined Servers Connecting to User-defined Servers Using Dynamic DNS (Domain Name Server) DDNS Service DDNS Data The Network Diagnostics Screen Ping DNS Lookup Page The Advanced PC Database Screen PC Properties The Security Screen Firewall Options Page Page Chapter 6: Configuring the Router for Client Mode Connecting the Computer to the Router The Client Mode Setup Screen The Wireless Client Profile Screen General Security Chapter 7: Operation and Usage When Changing Modes Using AP Mode Using AP/Router Mode Connecting in AP/Router Mode Page Using Client Mode Appendix A: Troubleshooting and Maintenance General Problems Problem 1: Cannot connect to the APC 3-in-1 Wireless Mobile Router to configure it. Wireless Access AP or AP/Router Mode Problem 1: The computer cannot locate the wireless access point. Router Mode Problem 1: A time-out error occurs when a URL or IP address is entered. Problem 2: Some applications do not run properly when using the APC 3-in-1 Wireless Mobile Router. Appendix B: About Wireless LANs Modes for Wireless LANs Ad hoc Mode Infrastructure Mode Basic Service Set (BSS) and Extended Service Set (ESS) Wired Equivalent Privacy (WEP) Appendix C: Specifications Multi-Function APC 3-in-1 Wireless Mobile Router Specifications Wireless Interface Specifications Regulatory Approvals CE Standards