APC ADSL 4-Port manual Diagnostic Test, Diagnostics Test Screen

Page 18

ADSL 4-Port Ethernet USB Wireless-G Router User Guide

Note: If you change the start or end values, make sure the values are still within the same subnet as the gateways IP address. In other words, if the gateways IP address is 192.168.1.1 (default) and you change the DHCP start/end IP addresses to be 192.128.1.2/192.128.1.100, you will not be able to communicate to the ADSL Router if your PC has DHCP enabled. In addition to the DHCP server feature, the ADSL Router supports the DHCP relay function. When the ADSL Router is configured as DHCP server, it assigns the IP addresses to the LAN clients. When the ADSL Router is configured as DHCP relay, it is responsible for forwarding the requests and responses negotiating between the DHCP clients and the server.

By turning off the DHCP server and relay the network administrator must carefully configure the IP address, Subnet Mask and DNS settings of every computer on your network. Do not assign the same IP address to more than one computer and your ADSL Router must be on the same subnet as all the other computers.

Figure 1-8 : Diagnostics Test Screen

5.4Diagnostic Test

Diagnostic Test is used for investigating whether the ADSL Router is properly connected to the WAN Network. See Fig 1-9.This test may take a few seconds to complete. To perform the test, select your connection from the list and press the Test button. Before running this test, make sure you have a valid DSL link.

Figure 1-9 : Diagnostics Test Screen

ADSL 4-Port Ethernet USB Wireless-G Router User Guide

Page 18 of 52

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Adsl 4-Port Ethernet USB Wireless-G Router Table of Contents Sntp Snmp Wireless-G System Configuration Diagram List of Ilustrations24 LAN Clients Adsl 4-Port Ethernet USB Wireless-G Router User Guide Declaration Of Conformity Radio Frequency Interference Warnings & Instructions RF ExposureTargeted Audience IntroductionScope and Purpose Manual OrganisationAdsl Router Description Adsl Router OverviewYour Gateway At a Glance Ports and ButtonsAdsl Router Overview Front Indicators Front IndicatorsBack Panel Indicators Back PanelInstalling The Adsl Router Setting Up the Adsl Router Logging into your Adsl RouterQuick Start Basic Home ScreenLAN / Dhcp Configuration Quick StartDiagnostic Test Diagnostics Test Screen10 Diagnostic Test Result screen Ping TestWireless Wireless Setup Wireless ConfigurationWireless Security 13 Wireless Configuration15 Wireless Security settings 17 Wireless Security Associated Stations Wireless ManagementAccess List Multiple SsidAdvanced WAN ConnectionNew Connection 20 New Connection Pppoe Connection Setup Adsl ModulationQuickstart LAN Configuration Refer to Figure23 LAN Configuration LAN ClientsEthernet Switch Configuration Application UPnPSntp 26 UPnPSnmp See FigIP QoS 28 Snmp ManagementIgmp Multicast 29 IP QoSDynamic DNS Client 30 Igmp MulticastEasy Connect Configuration DNS Proxy33 Easy Connect Configuration Port ForwardingMAC Filtering Bridge Filters 34 Port ForwardingAccess Control Snmp36 Access Control Static RoutingDynamic Routing 37 Static RoutingRouting Table 38 Dynamic RoutingSystem Password 40 System PasswordFirmware Upgrade 41 Firmware UpgradeRestore to Default SecurityIP Filters LAN IsolationURL Filter 46 URL FiltersStatus Connection StatusSystem Log 48 Connection StatusRemote Log Settings Network StatisticsDhcp Clients Modem StatusProduct Information Help
Top Page Image Contents