D-Link DIR-825 manual L2TP, Reconnect Mode Select either Always-on,On-Demand, or Manual

Page 27

Section 3 - Configuration

Internet Setup

L2TP

Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection.Your ISP will provide you with a username and password. This option is typically used for DSL services.

Address Mode: Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.

L2TP IP Address: Enter the L2TP IP address supplied by your ISP (Static only).

L2TP Subnet Mask: Enter the Subnet Mask supplied by your ISP (Static only).

L2TP Gateway: Enter the Gateway IP Address provided by your ISP.

L2TP Server IP: Enter the Server IP provided by your ISP (optional).

Username: Enter your L2TP username.

Password: Enter your L2TP password and then retype the password in the next box.

Reconnect Mode: Select either Always-on,On-Demand, or Manual.

Maximum Idle Time: Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.

DNS Servers: Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).

D-Link DIR-825 User Manual

23

Image 27

Contents Page Revision Date Description PrefaceManual Revisions TrademarksTable of Contents Registration Wireless SecurityProductPackageOverviewContents Utility Requirements System RequirementsComputer with the following Browser RequirementsTotal Performance IntroductionFeatures Connections Hardware OverviewStatus LED Power LEDLEDs Internet LEDBefore you Begin InstallationWireless Installation Considerations Connect to Cable/DSL/Satellite Modem Connect to Another Router Installation Getting Started Click Install RouterWeb-based Configuration Utility ConfigurationClick Launch Internet Connection Setup Wizard to begin Setup WizardConfiguration Configuration Configuration Click Manual Internet Connection Setup to begin Manual Internet Connection SetupServer Dynamic CableHost Name PrimaryInternet Setup PPPoE DSLConnection Manual PptpPage L2TP Reconnect Mode Select either Always-on,On-Demand, or ManualPage Static assigned by ISP Wireless Settings 802.11n/g 2.4GHz Manual Wireless SettingsPage 802.11n/a 5GHz Page Router Settings Network SettingsDhcp Server Settings Dhcp Reservation Virtual Server Configuration Port Forwarding Application Rules Speed QoS EnginePage Network Filters Access Control Wizard Access ControlAccess Control Wizard Access Control Wizard Add Website Select Allow or Deny Filtering Rule Website FiltersInbound Filters Firewall Settings Enable SPI NAT Endpoint FilteringEnable DMZ Routing Transmit Power Set the transmit power of the antennas Advanced Wireless Settings802.11n/a 5GHz Wish Settings Page Reset PIN to Wi-Fi Protected Setup WPSDevice Wizard StationEnable UPnP WAN Ping Advanced Network SettingsSecurity Mode Guest ZoneSchedule Administrator Settings Time Settings SysLog Server SysLog Server SysLogAuthentication authentication Email SettingsSystem Settings Check Email Notification of Newer Firmware Update FirmwareDdns System Check Schedules Device Information Log Statistics Internet Sessions Wish WirelessSupport What is WPA? Wireless SecurityWireless Security Setup Wizard Security Add Wireless Device with WPS Wizard Next to Security Mode, select WPA-Personal Configure WPA-Personal PSKNext to Security Mode, select WPA-Enterprise Configure WPA-Enterprise RadiusSecurity Using Windows Vista Connect to a Wireless NetworkConfigure Wireless Security Connecting to a Wireless Network Connect Using WCN 2.0 in Windows Vista Using Windows XP Configure WPA-PSK Connecting to a Wireless Network Why can’t I access the web-based configuration utility? TroubleshootingWhat can I do if I forgot my password? Troubleshooting Troubleshooting Wireless Basics Wireless Local Area Network Wlan What is Wireless?Wireless Personal Area Network Wpan HomeSmall Office and Home Office Eliminate Interference Centralize your router or Access PointSecurity Wireless ModesCheck your IP address Networking BasicsStep Statically Assign an IP addressTechnical Specifications For customers within the United States Contacting Technical SupportLimited Warranty WarrantyLimited Software Warranty Non-Applicability of WarrantySubmitting a Claim Disclaimer of Other Warranties What Is Not CoveredCopyright Statement Limitation of LiabilityGoverning Law TrademarksFCC Radiation Exposure Statement CE Mark WarningFCC Statement FCC CautionICC Notice IC Radiation Exposure StatementRèglement d’Industry Canada Registration