L2TP WAN Mode
A method of connection that requires you to enter your L2TP IP Address, L2TP Subnet Mask, L2TP Gateway IP Address, L2TP Server IP Address, Username and Password (provided by your Internet Service Provider) to gain access to the Internet.
Using the Configuration Interface
L2TP IP Address:
L2TP Subnet Mask:
L2TP Gateway IP Address:
L2TP Server IP
Address:
User Name:
Password:
Verify Password: Maximum Idle Time:
L2TP Connection:
Enter the IP Address provided by your ISP.
Enter the Subnet mask provided by your ISP.
Enter the Gateway address provided by your ISP.
Enter the IP address of the L2TP server you are connecting to. This information is provided by your ISP.
The username that you use to login to your Internet connection.
Enter the password associated with your username.
Retype the password for verification.
Defines how long the machine can be idle before the L2TP connection is disconnected.
The Disconnect button will immediately terminate any active connection. Note: These buttons become enabled after the router has been rebooted with the L2TP mode selected.
Basic > WAN > L2TP
LAN
Your internal network settings are configured based on the IP Address and Subnet Mask assigned in this section. The IP address is also used to access this
LAN Settings
IP Address:
Default Subnet Mask: RIP Announcement:
Gateway Metric:
The IP address of the router on the local area network. The local network settings are based on the address assigned here.
The subnet mask of your router on the local area network.
Used with multiple routers to broadcast routing information.
This option is used if you have multiple routers. 23
Basic > LAN