D-Link DGL-4300 manual Routing, Add/Edit Route, Route List, Netmask Gateway Interface Metric Save

Page 36

Routing

Add/Edit Route

Adds a new route to the IP routing table or edits an existing route.

Using the Configuration Interface

Enable: Destination IP:

Netmask:

Gateway:

Interface:

Metric:

Save:

Specifies whether the entry will be enabled or disabled.

The IP address or network that the packets will be attempting to access

Note: 192.168.1.0 with a Netmask of 255.255.255.0 means traffic will be routed to the entire 192.168.1.x network.

Used to specify which portion of the Destination IP signifies the network trying to be accessed and which part signifies the host that the packets will be routed to

Note: 255.255.255.255 is used to signify only the host that was entered in the Destination IP field.

Specifies the next hop to be taken if this route is used. A gateway of

0.0.0.0implies there is no next hop, and the IP address matched is directly connected to the router on the interface specified: LAN or WAN.

Specifies the interface, LAN or WAN, that the IP packet must use to transit out of the router when this route is used.

The amount of hops it will take to reach the Destination IP or network. A hop is considered to be traffic passing through a router from one network to another. If there is only one router between your network and the Destination network, then the Metric value would be 1.

Saves the new rule or modified existing rule to the Rules list. When you are done editing the settings, you must click the Save Settings button at the top of the page to make the changes effective and permanent.

Advanced > Routing

Route List

This section shows the current routing table entries. Certain required routes are predefined and cannot be changed. Entries on this list that can modified can be enabled/disabled by toggling the Enable checkbox. Editable entries can be modified by clicking on the paper and pencil icon. To delete an editable entry, click on the trash can icon. After you’ve completed all modifications or deletions, you must click the Save Settings button at the top of the page to save your changes. The router must reboot before new settings will take effect. You will be prompted to Reboot the Device or Continue. If you need to make additional settings changes, click Continue. If you are finished with your configuration settings, click the Reboot the Device button.

36

D-Link Systems, Inc.

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Page Contents Application Level Gateway ALG Configurations Table of Contents Appendix Package Contents Minimum System RequirementsIntroduction Features and Benefits Hardware Overview ConnectionsPower LED LEDsWireless Basics Installation Considerations Standards-based TechnologyUsing the Configuration Interface BasicWizard Internet Connection Setup Wizard Page Wireless Security Setup Wizard Page WAN ModesUse the Default MTU MAC AddressStatic WAN Mode Dhcp WAN ModeIP Address Subnet Mask Default Gateway Host Name Dhcp ConnectionPPPoE WAN Mode UsernameMaximum Idle Time PPPoE Connection Pptp WAN Mode Pptp IP Address Pptp Subnet MaskPptp Server IP Address Username Maximum Idle Time Pptp ConnectionL2TP WAN Mode LAN SettingsNumber of Dynamic Dhcp Clients Dhcp IP Address Range Dhcp Lease TimeAdd Static Dhcp Client Static Dhcp Client ListWireless Basic Wireless SettingsMode Super G Mode Wireless Security Mode WEPWPA-Personal WPA-EnterpriseAdvanced Virtual ServerAdd/Edit Virtual Server Virtual Servers ListProtocol Private Port Public Port Schedule Save Special Applications Application Level Gateway ALG ConfigurationsIPSec VPN NetMeetingAdd/Edit Special Applications Rule Special Applications Rules ListRule Name Schedule SaveGaming Add/Edit Game RuleGame Rules List Rule Name IP AddressGameFuel Setup GameFuelConnection Type Detected Xdsl or other Frame Relay Network Add/Edit GameFuel Rule GameFuel Rules ListName Priority Routing Add/Edit RouteRoute List Netmask Gateway Interface Metric SaveAccess Control EnabledAdd/Edit Access Control Rule Apply Web Filter Log Internet Access Filter Ports SaveAccess Control Rules List EnableWeb Filter Add/Edit Web SiteFilter Settings Mac Address FiltersAdd MAC Address MAC Address ListFirewall Settings Enable SPI Enable DMZ DMZ IP AddressFirewall Enable Name Inbound FiltersAdd/Edit Inbound Filter Rule Inbound Filter Rules ListConfiguring an Inbound Filter Rule Advanced Wireless Advanced Wireless SettingsAdmin PasswordSave and Restore Configuration Save Settings Restore SettingsTime Time ConfigurationSet the Date and Time Schedules Add/Edit Schedule RuleSchedule Rules List All DayEmail Settings Email Log When Full or on ScheduleSyslog System Commands Reboot the DeviceSystem Firmware Upgrade Firmware Upgrade Notification OptionsFirmware Firmware InformationDynamic DNS Status Device InfoGeneral ServerWireless LAN Wireless RadioChannel Turbo Mode Security Type Logs StatisticsLog Options Log DetailsWireless Statistics Sent Received TX Packets Dropped ErrorsActive Sessions LAN StatisticsChange Admin Password Change the default LAN IP addressAppendix Securing Your NetworkEnable WPA Personal or Enterprise Set up MAC FilteringSet the Visibility Status to Invisible Glossary Appendix Appendix Graphical user interface GUI Appendix Megabit Mb Megabyte MB Megabits per second Mbps Appendix Appendix Virtual LAN Technical Specifications Wireless Signal Rates1 with Automatic Fallback Power InputWarranty StandardsContacting Technical Support Tech Support for customers within the United StatesTech Support for customers within Canada Warranty Page Page FCC Caution Important NoteRegistration
Related manuals
Manual 2 pages 16.89 Kb Manual 72 pages 19.84 Kb

DGL-4300 specifications

The D-Link DGL-4300, also known as the Gaming Router, is designed specifically for gamers who require fast, reliable, and uninterrupted internet connectivity. Launched in the mid-2000s, this device has carved a niche in the gaming community for its robust features that cater to online gaming enthusiasts.

One of the standout features of the DGL-4300 is its support for the 802.11g wireless standard, which allows for wireless speeds of up to 54 Mbps. With this capability, gamers can enjoy seamless online gameplay without the frustration of lag, which is crucial when competing in high-stakes multiplayer environments. The router also boasts four 10/100 Ethernet LAN ports, providing wired connections for devices that demand even lower latency, such as gaming consoles and PCs.

Quality of Service (QoS) technology is another significant highlight of the DGL-4300. This feature prioritizes gaming traffic over standard internet usage, ensuring that your gaming sessions are smooth and devoid of interruptions caused by other applications consuming bandwidth. Gamers can assign priority levels to different devices and applications, allowing for optimized performance tailored to their needs.

In addition to gaming, the DGL-4300 supports secure wireless connectivity through its advanced encryption methods, including WPA and WPA2. This security ensures that personal data stays protected while users enjoy online gaming, streaming, or browsing. Moreover, the router’s built-in firewall and various security protocols safeguard the network from potential threats.

The DGL-4300 also includes a user-friendly web interface for easy configuration and management. Users can swiftly set up their network, manage device permissions, and monitor bandwidth usage, making it accessible even for those who may not be tech-savvy.

Overall, the D-Link DGL-4300 distinguishes itself with its gaming-centric design, solid wireless capabilities, and advanced traffic management features. This router has remained popular among gamers for its reliability and performance, adapting well to the demanding needs of online gaming. Whether you’re a casual player or a serious competitor, the DGL-4300 provides the backbone for an exhilarating online gaming experience.
Top Page Image Contents