Using The Setup Wizard (continued)
Step 3 - PPTP
Specify both PPTP tunnel parameters and Physical interface parameters.
PPTP tunnel parameters: Enter the Username, Password and the PPTP Server IP address provided by your ISP.
Physical interface parameters.
DHCP: If your Internet Service Provider is using DHCP you should select the DHCP radio button.
Static IP: If your Internet Service Provider is using Static IP you should select the Static IP radio button and enter IPAddress, choose a Subnet Mask and enter the Gateway IP address.
Click Next
Step 3 - Big Pond
Fill out the user name and password provided to you by your ISP.
Click Next and continue to step 4
Click Next
7