D-Link DFL-200 warranty Power Receptor

Connecting The DFL-200 Network Security Firewall To Your Network

A.Connect the power adapter to the receptor on the back panel of the DFL-200 and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.

B.Power off your Cable or DSL modem; some devices may not have an on/off switch and will require you to unplug the power adapter. Now, the DFL-200 should be powered on and the Cable / DSL modem should be turned off.

Cable / DSL modem (Power Off) – DFL-200 (Power On)

C.Attach an Ethernet cable to the Ethernet jack located on the Cable / DSL modem. After the Ethernet cable is securely connected, power on the Cable / DSL modem by turning on the unit or plugging in the power adapter.

Cable / DSL modem (Power On) – DFL-200 (Power On)

D.Attach the other end of the Ethernet cable to the WAN port on the back panel of the DFL-200. The WAN LED light will illuminate to indicate proper connection. If the WAN LED is not illuminated, please go back to step B and repeat the steps.

E.Attach an Ethernet cable to a LAN port on the back panel of the DFL-200 and connect it to a port on your network hub or switch. The LED light for the LAN port on the DFL-200 will illuminate to indicate proper connection.

F.Connect the computer that you will use to configure the DFL-200 to the network hub or switch.

LAN ports: Connect	DMZ port: Connects	WAN port: Connects to
the local area network.	to the DMZ network.	the Cable or DSL modem.

COM Port: Connects to your	Power Receptor:
computer’s COM port using the	Connection for the
provided Console Cable.	Power Adapter.

2