D-Link DI-707P user manual

Page 34

B.The second way to get an IP address is to input one manually as follows:

a.Select Specify an IP address in the IP Address tab. The default IP address of the DI-707P is 192.168.0.1. So please use 192.168.0.xxx (where xxx is between 2 and 254) for the IP Address field and 255.255.255.0 for Subnet Mask field.

-34-

Image 34

Contents DI-707P Table of Contents Page Functions and Features IntroductionUser-Definable Application Sensing Tunne l Access Control supportedVirtual Server supported DMZ Host supportedIntroduction to Broadband Router Technology Introduction to FirewallsIntroduction to Local Area Networking Introduction to Virtual Private NetworkingPoint -to-Point Tunneling Protocol Pptp Contents of Package DI-707P Ethernet Broadband RouterPanel Layout Front PanelInstallation Requirements PrinterNetwork Settings Is the TCP/IP of your computers properly configured? Configuring the Ethernet Broadband Router Start-up and LogDevice Information Useful Tools Setup PPP over Ethernet Dynamic IP AddressDial-up Network ∙ Input the Pptp Account and Password Dhcp Server Virtual Server Special Applications Access Control Miscellaneous Items MAC Address Control MAC Address ControlConnection control Configuring on Unix based Platforms IP AddressAppendix a Resetting the System Password or IP Address Install TCP/IP Protocol into Your PC Appendix B TCP/IP Configuration for Windows 95/98Go to Start Settings , then click Control Panel Select Microsoft in the Network Protocols list Set TCP/IP Protocol for Working with the DI-707P Page Don’t input any value in the Gateway tab Choose Disable DNS in the DNS Configuration tab Page Page Page Technical Specifications ∙ 10% ~ 90% Contacting Technical Support Mail support@dlink.com PhoneLink Locations Worldwide Barcelona Limited Warranty Product Type Warranty PeriodWhat You Must Do For Warranty Service What Is Not Covered CE Mark Warning Registration