D-Link DIR-635 manual Pptp

Page 19

Section 3 - Configuration

Internet Setup

PPTP

Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services.

Address Mode: Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.

PPTP IP Address: Enter the IP address (Static PPTP only).

PPTP Subnet Enter the Primary and Secondary DNS Server Addresses

Mask: (Static PPTP only).

PPTP Gateway: Enter the Gateway IP Address provided by your ISP.

PPTP Server IP: Enter the Server IP provided by your ISP (optional).

Username: Enter your PPTP username.

Password: Enter your PPTP password and then retype the password in the next box.

Reconnect Mode: Select either Always-on,On-Demand, or Manual.

Maximum Idle Enter a maximum idle time during which the Internet Time: connection is maintained during inactivity. To disable this

feature, enable Auto-reconnect.

DNS Servers: The DNS server information will be supplied by your ISP (Internet Service Provider.)

D-Link DIR-635 User Manual

19

Image 19

Contents Page Table of Contents Troubleshooting Wireless Basics Wireless SecurityNetworking Basics ProductPackageOverviewContents Total Performance IntroductionFeatures Connections Hardware OverviewInternet LED LEDsBefore you Begin InstallationWireless Installation Considerations Getting Started Web-based Configuration Utility ConfigurationClick Launch Internet Connection Setup Wizard to begin Setup WizardConfiguration Configuration Configuration Dynamic Cable Manual ConfigurationPPPoE DSL Internet SetupPptp Page L2TP Page Static assigned by ISP Big Pond Channel Width Wireless SettingsWireless Security Network Settings Dhcp Server Settings Dhcp Reservation Virtual Server Configuration Port Forwarding Application Rules Speed QoS EngineDhcp Client Network FiltersAccess Control Access Control Wizard Access Control Wizard Website Filters Inbound Filters Firewall Settings Application Level Gateway ALG Configuration Advanced Wireless Settings Advanced Network Settings Administrator Settings Time Settings SysLog Server SysLog Server SysLogAuthentication authentication Email SettingsSystem Settings Check Email Notification of Newer Firmware Update FirmwareDdns System Check Schedules Device Information Log Active Sessions StatsSupport WirelessWhat is WEP? Wireless SecurityWhat is WPA? Wireless Security Setup Wizard Security Security Configure WEP Configure WPA-Personal PSK WPA2 Configure WPA-Enterprise RadiusSecurity Using Windows XP Connect to a Wireless NetworkConfigure WEP Connecting to a Wireless Network Configure WPA-PSK Connecting to a Wireless Network Why can’t I access the web-based configuration utility? TroubleshootingWhat can I do if I forgot my password? Troubleshooting Troubleshooting Wireless Basics Wireless Local Area Network Wlan What is Wireless?Home Wireless Personal Area Network WpanSmall Office and Home Office Eliminate Interference Centralize your router or Access PointSecurity Wireless ModesCheck your IP address Networking BasicsStep Highlight Internet Protocol TCP/IP and click Properties StepConnect to Cable/DSL/Satellite Modem Connect to Another Router Appendix B Networking Basics LEDs Technical Specifications