Section 4 - Security
Configure WEP
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1.Log into the
2.Next to Security Mode, select WEP.
3.Next to WEP Key Length, select the level of ecryption (64 or
Hex - (recommended) Letters
ASCII - All numbers and letters are valid.
4.Next to WEP Key 1, enter a WEP key that you create. Make sure you enter this key exactly on all your wireless devices. You may enter up to 4 different keys.
5.Next to Authentication, select Shared Key.
6.Click Save Settings to save your settings. If you are
configuring the router with a wireless adapter, you will lose connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the router.
63 |