D-Link manual DI-634M User’s Manual

Page 66

DI-634M User’s Manual	Frequently Asked Questions

3 How can I setup my router to work with DSL or any PPPoE connection?

Make sure you disable or uninstall any PPPoE software such as WinPoet or Enternet 300 from your computer or you will not be able to connect to the Internet.

Step 1: Upgrade Firmware if needed.

(Please visit the D-Link tech support website at: http://support.dlink.com for the latest ﬁrmware upgrade information.)

Step 2: Take a paperclip and perform a hard reset. With the unit on, use a paperclip and hold down the reset button on the back of the unit for 10 seconds. Release it and the router will recycle, the lights will blink, and then stabilize.

Step 3: After the router stabilizes, open your browser and enter 192.168.0.1 into the address window and hit the Enter key. When the password dialog box appears, enter the username admin and leave the password blank. Click OK.

If the password dialog box does not come up repeat Step 2. Note: Do not run Wizard.

Step 4: Click on the WAN tab on left-hand side of the screen. Select PPPoE.

Step 5: Select Dynamic PPPoE (unless your ISP supplied you with a static IP Address).

Step 6: In the username ﬁeld enter ELN/username@earthlink.net and your password, where username is your own username.

For SBC Global users, enter username@sbcglobal.net. For Ameritech users, enter username@ameritech.net. For BellSouth users, enter username@bellsouth.net.

For Mindspring users, enter username@mindspring.com. For most other ISPs, enter username.

Step 7: Maximum Idle Time should be set to zero. Set MTU to 1492, unless speciﬁed by your ISP, and set Autoreconnect to Enabled.

Note: If you experience problems accessing certain websites and/or email issues, please set the MTU to a lower number such as 1472, 1452, etc. Contact your ISP for more information and the proper MTU setting for your connection.

Step 8: Click Apply. When prompted, click Continue. Once the screen refreshes, unplug the power to the D-Link router.

D-Link Systems, Inc.

66

Image 66

Contents Page Table of Contents DI-634M User’s Manual StatusSecuring Your Network Glossary Package Contents Minimum System RequirementsIntroduction Features and Beneﬁts Hardware Overview Reset ButtonAuto MDI/MDIX WAN Port DC Power Connector ConnectionsLEDs WAN LEDWireless Basics Installation Considerations Standards-Based TechnologyGetting Started Using the Conﬁguration Menu Home WizardHome Wizard Wireless Home WirelessChannel Super G Mode Disabled Ssid Broadcast Authentication WEP Encryption Key Type KeysHost Name MAC Address Home WAN Dynamic IP AddressUse MAC Home WAN Static IP AddressIP Address Subnet Mask PPPoE Home WAN PPPoEMTU Dial on Demand Auto-reconnectHome LAN IP Address Subnet Mask DNS RelayDhcp Home DhcpAdvanced Virtual ServerAdvanced Virtual Server Public Port Schedule Example #1 Select Enabled or Disabled Virtual Server Name Private IPApplications Example #2Protocol Type Filters Advanced Filters MAC FiltersFilters MAC Filters Name Parental Control Advanced Parental Control URL BlockingURL Blocking URL String IP Range Advanced Firewall Firewall Rules Enable or disable the Firewall NameFirewall ActionDMZ Advanced DMZAdmin Tools AdminTools Administrator Password User User is the User login nameTime Time Zone Customized NTP ManualTools Time Load Settings from Local Hard Drive SystemTools System Firmware Tools FirmwareBrowse User Name Password Tools DdnsMisc Tools MiscPing Test Restart Device Block WAN Ping VPN Pass Through Cable Test Status Device InfoStatus Device Info Wireless DisabledLog Status LogView Log Status Log Log Settings System Log All Log URL Filter Log New Connection LogStats Status StatsTroubleshooting Default DI-634M User’s Manual Link 108G Mimo DWL-G650M Why does my wireless connection keep dropping? Why can’t I get a wireless connection?Resetting the DI-634M to Factory Default Settings Forgot my encryption keyTechnical Speciﬁcations Power Input Physical DimensionsWireless Transmit Power WeightReceiver Sensitivity Frequently Asked Questions Why can’t I access the Web-based conﬁguration?How to tell straight-through cable from a crossover cable DI-634M User’s Manual DI-634M User’s Manual DI-634M User’s Manual DI-634M User’s Manual  Click Specify an IP Address DI-634M User’s Manual  Right-click on My Network Places and select Properties  Highlight Internet Protocol TCP/IP and click PropertiesDI-634M User’s Manual DI-634M User’s Manual Static Cable Connection DI-634M User’s Manual DI-634M User’s Manual To set up your router How do I open ports on my router?Click Apply and then click Continue What is DMZ? How do I conﬁgure the DMZ Host?Demilitarized Zone DI-634M User’s Manual DI-634M User’s Manual How do I use PC Anywhere with my DI-634M router? What are virtual servers?Create a second entry as shown below Link Systems, Inc How can I use eDonkey behind my D-Link Router? Click on Advanced and then click FirewallClick Apply and then Continue How do I configure my router for KaZaA and Grokster? How do I conﬁgure my router to play Warcraft 3? Click on Advanced and then click Virtual ServerWhat is NAT? How do I use NetMeeting with my D-Link Router?Conﬁgure the Game Port information on each computer Appendix Change Admin PasswordSet up MAC Filtering Securing Your NetworkGlossary DI-634M User’s Manual DI-634M User’s Manual DI-634M User’s Manual Megabyte MB Megabits per second Mbps DI-634M User’s Manual DI-634M User’s Manual Inc Contacting Technical Support Tech Support for customers within the United StatesTech Support for customers within Canada Warranty Warranty DI-634M User’s Manual Important Note Registration