Linksys BEFSR41W manual Instant BroadbandTM Series

Page 13

Instant BroadbandTM Series

4. Configure the following values.

Note: All of this information should be readily available from your ISP.

Host Name & Domain Name These fields allow you to supply a host and domain name for the Router. Some ISPs require these names as identifi- cation. You may have to check with your ISP to see if your Broadband Internet service has been configured with a host and domain name. In most cases, leaving these fields blank will work.

LAN IP Address These values refer to your internal network settings. Unless you have specific internal needs, there should be no reason to change these values. For the internal LAN, the default values are as fol-

lows.

 

• Private IP Address:

192.168.1.1

• Subnet Mask:

255.255.255.0

Wireless In this section, enter the ESSID and Channel for your wireless net- work. You can provide access to your network for other PCs with Access Control. You’ll need to enter the MAC Address, then click on Add for any PC that you want to add. Click on Apply when finished. You can decide whether or not to use WEP Encryption and configure the level of WEP Encryption. WEP Encryption is not necessary for the operation of your Router. For more information, see the section of this guide called Setting WEP Encryption. You must use a wireless PC card (sold separately) to use this and any other wireless feature.

WAN IP Address These values refer to the outside network you connect to every time you access your Broadband Internet connection. Most Broadband ISPs assign their clients a different IP address each time they log on. If this is the case with your ISP, click Obtain an IP Address Automatically and continue to step 5. If your ISP assigns you a fixed IP address, click Specify an IP Address and enter the address into the Subnet Mask, Default Gateway Address, and DNS fields provided by the ISP.

Login This section is used if you are using a dial-up style connection like PPPoE or RAS.

PPPoE (Point-to-Point Protocol over Ethernet) is used by DSL-based ISPs to establish communications with an end-user. If you are using a DSL line, check with your ISP to see if they use PPPoE. If they do use PPPoE, you must enable it by selecting PPPoE in the login section. If you do enable PPPoE, remember to remove any existing PPPoE applications already on any of your PCs. To enable PPPoE:

EtherFast® Cable/DSL Wireless-Ready Router with 4-Port Switch

1.Click on the button next to PPPoE.

2.Enter the User Name you use to log on to your Internet connection.

3.Enter your corresponding Password.

RAS (Remote Access Service) is a service used in Singapore only. If you are using a RAS connection, check with your ISP for the necessary setup infor- mation.To enable RAS:

1.Click on the button next to RAS.

2.Enter the User Name you use to log on to your Internet connection.

3.Enter your corresponding Password.

RAS Plan Select the type of plan you have.

Connect on Demand (Only available if PPPoE is enabled) If you aren’t actively using the Internet, you can configure your Router to cut your con- nection with your ISP after a certain period of time. If you have been dis- connected due to inactivity, Connect on Demand enables your Router to automatically re-establish your connection as soon as you attempt to access the Internet again. Click on the button next to Connect on Demand to Enable the option.

Keep Alive Option This option keeps your PPPoE-enabled Internet access connected indefinitely, even when it sits idle. It keeps the connection alive by sending out a few data packets periodically, so your Internet service thinks that the connection is still active. To use this option, click on the but- ton next to Keep Alive to select it.

5.When you have properly configured the Setup page, click Apply, and then click Continue.

6.Reset the power on the cable or DSL modem, and then restart the com- puter so the computer can obtain the new Router information.

Your Cable/DSL Wireless-Ready Router is now configured to your net- work. If you would like, you may continue on to learn more about the Router’s Web-based Utility.

Note: Make sure that a Network Card or adapter has been successfully installed into each PC you plan on configuring before you continue.

18

19

Page 12 Page 14
Image 13
Page 12 Page 14
Contents EtherFast Cable/DSL Wireless-Ready Router With 4-Port Switch Copyright & Trademarks Table of Contents Features Linksys Cable/DSL Wireless-Ready RouterIntroduction Cable/DSL Wireless-Ready Router’s Rear Panel Package ContentsMinimum Requirements Reset Button Wireless-PC CardCable/DSL Wireless-Ready Router’s Front Panel LEDs About Static & Dynamic IP Addresses OverviewConnecting Your Hardware Together and Booting Up Instant BroadbandTM Series Setup Adding Wireless Capabilities to Your RouterEssid Configuring the Cable/DSL Wireless-Ready Router Instant BroadbandTM Series Quick & Easy Administration Cable/DSL Wireless-Ready Router’s Web- based UtilitySetup p Password Setting WEP Encryption Status Help Log Incoming/Outgoing Access Logs Here you will specify whetherFilters UPnPPort Forwarding Port Using IPSec Pass ThroughPort Range Forwarding Dynamic Routing Static Routing MAC Address Cloning DMZ HostCommon Problems and Solutions Appendix a TroubleshootingFrequently Asked Questions Through IPSec is supported Step One Pinging an IP Address Appendix B How to Obtain Your ISP’s E-mail & Web AddressesFigure C-1 Appendix C Installing the TCP/IP ProtocolFigure C-2 Appendix D Twisted-Pair CablingBlesCrimping Your Own Network Appendix E GlossaryInstant BroadbandTM Series Instant BroadbandTM Series Speed Appendix F SpecificationsEnvironmental Appendix G Warranty InformationAppendix H Contact Information Copyright 2002 Linksys, All Rights Reserved

BEFSR41W specifications

The Linksys BEFSR41W is a versatile wireless broadband router that has been a popular choice for both home and small office environments since its introduction. Designed to offer reliable internet connectivity, the BEFSR41W combines wired and wireless capabilities, ensuring that users can connect multiple devices efficiently.

One of the standout features of the Linksys BEFSR41W is its integrated 4-port 10/100 Ethernet switch, which allows users to connect their wired devices directly. This is particularly useful for users who require stable connections for activities such as gaming or streaming high-definition content. The router supports the IEEE 802.3 and 802.3u standards, ensuring compatibility with a wide range of devices.

In terms of wireless capabilities, the BEFSR41W operates on the 802.11b and 802.11g standards, providing maximum wireless data rates of up to 54 Mbps. This enables users to experience reasonably fast wireless internet speeds for everyday online activities such as browsing and emailing. The router's built-in antenna offers decent coverage, making it suitable for smaller homes and office spaces.

Security is a key consideration for any network device, and the Linksys BEFSR41W incorporates several features to help safeguard users' data. It supports Wired Equivalent Privacy (WEP) and Wi-Fi Protected Access (WPA) encryption methods, allowing users to set up secure connections and protect sensitive information from unauthorized access. Additionally, the router includes a built-in firewall to help prevent external attacks and threats.

Another significant characteristic of the BEFSR41W is its easy setup process. The router comes with a user-friendly web-based interface that simplifies the configuration process. Users can easily set up their network, configure security settings, and manage connected devices without needing specialized technical skills.

Additionally, the router is designed for longevity, with robust build quality ensuring reliability over time. It is also backward compatible with older wireless standards, which provides flexibility for users who have legacy devices in their network.

In conclusion, the Linksys BEFSR41W is a solid option for anyone seeking a dependable routing solution that balances both wired and wireless connectivity. With its blend of features, ease of use, and security options, it remains a relevant choice for users looking to establish a basic home or small office network.
Top Page Image Contents