D-Link AG DI-784 manual Maximum, Idle Time, Auto-reconnect, Home LAN

Page 19

Using the Configuration Menu (continued)

Home > WAN > PPPoE continued

Primary/Secondary Enter a DNS Address if you do not wish to use the one provided

DNS-	by your ISP. (DNS is short for Domain Name System. It trans-
	lates domain names into IP Addresses).
Maximum	Enter a maximum idle time during which Internet connection is
Idle Time-	maintained during inactivity. To disable this feature, enter zero
	or enable Auto-reconnect.
MTU-	Maximum Transmission Unit-1472 is default-you may need to
	change the MTU to conform with your ISP.
Auto-reconnect-	If enabled, the DI-784 will automatically connect to your ISP af-
	ter your system is restarted or if the connection is dropped.
	Home > LAN

LAN is short for Lo- cal Area Network. This is considered your internal network. These are the IP set- tings of the LAN inter- face for the DI-784. These settings may be referred to as Pri- vate settings. You may change the LAN IP Address if needed. The LAN IP Address is private to your in- ternal network and cannot be seen on the Internet.

IP Address-

Subnet Mask-

Local Domain Name-

The IP Address of the LAN interface. The default IP Asddress is: 192.168.0.1.

The subnet mask of the LAN interface.

The default subnet mask is 255.255.255.0.

The domain name assigned to the router.

19

Image 19

Contents Manual Contents Package Contents Introduction LAN ports WAN port is PowerAdapter Features LEDs Front Panel of Unit Wireless Basics Wireless Basics Getting Started Setting up a Wireless Infrastructure2 NetworkHome Wizard Using the Configuration MenuHome Wireless Open or Shared Wireless Settings Using the Configuration MenuKeys Home Wireless Open or Shared Channel AuthenticationWEP Encryption Key TypeLifetime Home Wireless WPA AuthenticationRadius Server Home Wireless WPA-PSK Primary/Secondary DNS Home WAN Dynamic IP Address Host Name MAC Address CloneGateway Address Primary/ Secondary DNS Home WAN Static IP Address Subnet MaskPPPoE PasswordService Name Home WAN PPPoEHome LAN MaximumIdle Time Auto-reconnectDynamic Host Control Protocol. Home DhcpAdvanced Virtual Server Example #1 Example #2 Name Trigger Port Trigger Type Public Port Advanced ApplicationsPublic Type Protocol Types Advanced Filters IP FiltersIP Filters PortFilters URL Blocking- Keywords Advanced Filters URL BlockingFilters MAC Filters Name MAC Address Dhcp Client Advanced Filters MAC FiltersPermitted Domains Advanced Filters Domain BlockingFilters Domain BlockingSource Advanced FirewallFirewall Rules ActionDMZ Advanced DMZTransmit Power Beacon interval RTS Threshold Fragmentation Advanced Performance 802.11a WirelessData Rate TX Rates Advanced Performance 802.11a Super a ModeTransmit Power Beacon interval PerformanceAdvanced Performance 802.11g RTS Threshold Ssid Broadcast Super G ModeDtim interval Admin Password Advanced Performance 802.11g CTS ModeTools Admin Administrator Login Name User Login NameDefault Tools AdminTools Time Load Settings from Tools System System Settings Save Settings toRestore to Factory Browse Tools Firmware UpgradeDiscard Ping Tools MiscPing Test Restart DeviceTools Cable Test Status Device Info Log SettingsStatus Log View Log Email Address Status Log Log Settings Smtp Server IP AddressLog Type Status Stats Status Wireless Connected Client ListHelp Microsoft Windows XP Networking BasicsNetworking Basics Workgroup name Enter a Computer description and a Computer name optionalNetworking Basics Format the disk if you wish, and click Next Networking Basics Network Setup Wizard Right-click on My Computer Naming your ComputerComputer name Checking the IP Address in Windows XPControl Panel Support tabProperties Network ConnectionsAssigning a Static IP Address Windows XP/2000 Assigning a Static IP Address with Macintosh OSX Selecting a Dynamic IP Address with Macintosh OSX Checking the Wireless Connection by Pinging in Windows Me Troubleshooting Troubleshooting Manager Select Hardware TabAdapters Why does my wireless connection keep dropping? Why can’t I get a wireless connection?Resetting the DI-784 to Factory Default Settings Advanced Firewall Features Technical SpecificationsTechnical Specifications Wireless Transmit Power Why can´t I access the web based configuration? Frequently Asked QuestionsFrequently Asked Questions LAN Settings button How can I find my IP Address in Windows 95, 98, or ME? How can I find my IP Address in Windows 2000/XP? Places and select Properties How can I assign a Static IP Address in Windows XP?Network Neigborhood icon Win ME My YesClick Specify an IP Address Click on the DNS Configuration tabDynamic Cable connection Static Cable Connection Frequently Asked Questions To set up your router How do I open ports on my router? How do I configure the DMZ Host? What is DMZ?Demilitarized Zone DI-784 Frequently Asked Questions What are virtual servers? How do I use PC Anywhere with my router?Click Continue ClickFirewall How can I use eDonkey behind my D-Link router?How do I set up my router for Socom on my Playstation 2? Private Port Public Port How can I use Gamespy behind my D-Link router?How do I configure my router for KaZaA and Grokster? Configure the Game Port information on each computer How do I configure my router to play Warcraft 3?For the DI-604, DI-614+. DI-624, DI-754, DI-764, or DI-784 How do I use NetMeeting with my D-Link router? How do I set up my router to use iChat? -for Macintosh usersStep Choose Apple menu System Preferences Choose View Sharing Then Virtual ServerFrequently Asked Questions What is NAT? Technical Support USA only Warranty and RegistrationPage Important Note