D-Link AG DI-784 manual Advanced Performance 802.11a Super a Mode, TX Rates

Using the Configuration Menu (continued)

Advanced > Performance > 802.11a (Continued)

Super A Mode-	Super A is a group of performance enhancement features that
	increase end user application throughput in an 802.11a network.
	Super A is backwarsd compatible to standard 802.11a devices.
	For top performance, all wirelss devices on the network should
	be super Acapable. Select either Disabled, Super Awithout Turbo,
	Super A with Dynamic Turbo, or Super A with Static Turbo.
Disabled-	Standard 802.11a support, no enhanced capabilities.
Super A without	Capable of Packet Bursting, FastFrames, Compression, and no
Turbo-	Turbo mode.
Super A with	Capable of Packet Bursting, FastFrames, Compression, and
Dynamic Turbo-	Dynamic Turbo. This setting is backwards compatible with non-
	Turbo (legacy) devices. Dynamic Turbo mode is only enabled
	when all nodes on the wireless network is Super A with Dynamic
	Turbo enabled.

Super A with Static Turbo-

Capable of Packet Bursting, FastFrames, Compression, and Static Turbo. This setting is not backwards compatible with non- Turbo (legacy) devices. Static turbo mode is always on and is only enabled when all nodes on the wireless network is Super A with Static Turbo enabled.

Wireless	Advanced > Performance > 802.11g
Performance-

Select 802.11a or 802.11g. 802.11g is selected here. Dis- played in this window are the Wireless Performance fea- tures for theAccess Point por- tion of the DI-784.

TX Rates-

Auto is the default selec- tion. Select from the drop down menu for your selec- tion.

Transmit Power-

Beacon interval-

Full is the default selection. Select from the drop down menu for your selection.

Beacons are packets sent by the DI-784 to synchronize a wire- less network. Specify a value. 100 is the default setting and is

recommended.32