Linksys WET54G V3 manual Status, LAN Settings, LAN Statistics, Wireless Settings

Page 32

Wireless-G Ethernet Bridge

Status

The Status screen displayed the Bridge’s current status and settings. All information is read-only.

•Device Name - The name you have assigned to the Bridge is displayed here.

•Firmware Version - The version number of the Bridge’s firmware is displayed here. Firmware updates are posted at www.linksys.com. Firmware should be upgraded ONLY if you experience problems with the Bridge. To upgrade the Bridge’s firmware, use the Help screen.

•MAC Address - The MAC Address of the Bridge is displayed here.

LAN Settings

•IP Address - The Bridge’s IP Address is displayed here.

•Subnet Mask - The Bridge’s Subnet Mask is displayed here.

•Gateway - The Gateway address for the Bridge is displayed here.

LAN Statistics

•Ethernet TX - The number of packets transmitted to the Ethernet network is displayed here.

•Ethernet RX - The number of packets received from the Ethernet network is displayed here.

•Wireless TX - The number of packets transmitted to the wireless network is displayed here.

•Wireless RX - The number of packets received from the wireless network is displayed here.

Wireless Settings

•SSID - The Bridge’s SSID is displayed here.

•Network Type - The Bridge’s mode is displayed here.

•Channel - The Bridge’s channel setting is displayed here.

•Security- The status of the Bridge’s security is displayed here.

•TX Rate - The Bridge’s transmission rate is displayed here.

Chapter 7: Using the Wireless-G Ethernet Bridge Web-based Utility

Figure 7-13: Status Tab

26

Status

Image 32

Contents Wireless- G How to Use this Guide Copyright and TrademarksTable of Contents Wireless-G Ethernet Bridge Infrastructure Network Ad-Hoc Network10 RADIUS-TTLS Introduction What’s in this Guide? Wireless-G Ethernet Bridge Network Topology Planning Your Wireless NetworkAd-Hoc versus Infrastructure Mode Network Layout Ad-Hoc NetworkGettingtoKnowtheWireless-GEthernetBridge LANFront Panel Connecting the Wireless-G Ethernet Bridge for Setup Connect the PowerSetting Up the Wireless-G Ethernet Bridge WelcomeList of Bridges Wireless Settings Security Settings-WEP 10 Confirmation Connecting the Wireless-G Ethernet Bridge for Network Use Placement OptionsConnection to a Network Device Wall Mount OptionVertical Placement Stand OptionStarting the Web-based Utility Using the Wireless-G Ethernet Bridge Web-based UtilityOverview Setup WirelessSite Survey WEP WEPWPA Pre-Shared Key Radius MD5TLS RADIUS-TLSTtls 10 RADIUS-TTLSAdvanced Settings 11 Password TabMAC Address LAN Settings Wireless SettingsStatus LAN StatisticsHelp 14 Help TabAppendix a Troubleshooting Common Problems and SolutionsFrequently Asked Questions Web-based Utility won’t openWhat is ad-hoc mode? What is ISM band? Security Threats Facing Wireless Networks Appendix B Wireless SecuritySecurity Precautions Appendix B Wireless Security Wireless-G Ethernet Bridge Figure C-1 Firmware Upgrade Appendix C Upgrading FirmwareNetwork Neighborhood/My Network Places Appendix D Windows HelpShared Resources Appendix E Glossary Wireless-G Ethernet Bridge Wireless-G Ethernet Bridge Wireless-G Ethernet Bridge Wireless-G Ethernet Bridge Wireless-G Ethernet Bridge Appendix F Specifications Warranty Year Limited Storage TempOperating Humidity Storage HumidityAppendix G Warranty Information Limited WarrantyAppendix H Regulatory Information FCC StatementIndustry Canada Canada EC Declaration of Conformity EuropeSafety Notices FranceAppendix I Contact Information