Linksys la), wag300n (eu manual Summary, Remove

Wireless-N ADSL2+ Gateway

	unique identifier for your network device. When the Gateway identifies the device entered, the
	Gateway will allocate the priority set for that entry. Check the device’s documentation to obtain
	the MAC Address.
Priority	Select the bandwidth priority for the application you selected. Select High, Medium, Normal,
	or Low for the bandwidth, but don’t set all applications to High. Once you have made your
	selection, click Add to add to the Summary list.

Summary

Priority	This displays the bandwidth allocation priority of High, Medium, Normal, or Low, that you set
	for the application.
Name	This displays the application name or the entries you entered to be allocated.
Information	This displays the Port Range or MAC Address entered when you added a new application. If a
	pre-configured application was selected, there will be no valid entry shown in this section.
Remove	This button allows you to remove the application entry. To remove the entry, click the Remove
	button. To save the configuration, click the Save Settings button. Otherwise, to cancel, click
	the Cancel Changes button.

When finished making your changes on this tab, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes. Click Help for more information.

Chapter 5: Configuring the Wireless-N ADSL2+ Gateway

Figure 5-39: QoS - Add a New Application (MAC Address)

39

The Applications and Gaming Tab