Linksys WAP51AB Setting Up TCP/IP in Windows, TCP/IP Setup for Windows 95, 98, and Millennium

Page 19

Instant Wireless™ Series

Appendix B: Setting Up the TCP/IP and IPX Protocols

Setting Up TCP/IP in Windows

Before a computer can communicate with the Access Point, it must be config- ured with the TCP/IP protocol. If you know how to set up TCP/IP on your com- puters, do so now. Otherwise, use the guidelines below to help get TCP/IP installed on all of the computers that need to communicate with the Access Point. If you are unable to successfully install TCP/IP on one or more comput- ers after following the directions, contact the manufacturer of your computers' network operating system for further assistance. Check with your network administrator for your TCP/IP settings.

The directions below provide general guidelines for coming up with IP address- es and subnet masks. Check with your network administrator to see if you need to use specific IP addresses or DHCP settings.

First, each computer on the network will require an IP address, which is a series of numbers, separated by periods, identifying the PC on the network. To make things simple, you should use the following numbering scheme:

192.168.1.X

In this example, X is a unique, arbitrarily assigned number from 1 to 254. Each computer must have its own unique X number. Note: Never use 0, 250 or 255 for X. These numbers are reserved by TCP/IP for other uses.

For example, if you have three computers, you could number them as follows:

192.168.1.17

192.168.1.44

192.168.1.126

In this case, 17, 44, and 126 are arbitrary numbers between 1 and 254.

Each computer will also require a subnet mask, which is a numerical “filter” that tells a computer what kinds of TCP/IP data packets to accept. If you’re not sure which mask to use, the following mask is recommended:

255.255.255.0

Dual-Band Wireless Access Point

The following instructions are provided as examples for reference only. For complete instructions on installing and troubleshooting TCP/IP and IPX, con- sult your Windows operating system documentation.

TCP/IP Setup for Windows 95, 98, and Millennium

1.Click the Start button, select Settings, and open the Control Panel. Inside the Control Panel, double-click the Network icon.

2.If the TCP/IP Protocol is listed for your network adapter, go to step five. Otherwise, click the Add button.

3.When the Component Type window appears, select Protocol and click the Add button.

4.Select Microsoft in the Manufacturers list and choose TCP/IP in the Network Protocols list. Then, click the OK button.

5.When the Network window reappears, click TCP/IP. Then, click the Properties button.

6.Select Specify an IP Address.

7.Enter an IP Address for the computer, along with a Subnet Mask. Click the OK button. If you do not have these values, consult your network adminis- trator.

8.When the Network window reappears, click the OK button. Restart your machine. TCP/IP has now been successfully installed.

IPX Setup for Windows 95, 98, and Millennium

1.Click the Start button, select Settings, and open the Control Panel. Inside the Control Panel, double-click the Network icon.

2.If the TCP/IP Protocol is listed for your network adapter, go to step four. Otherwise, click the Add button.

3.When the Component Type window appears, select Protocol and click the Add button.

4.Select Microsoft in the Manufacturers list and choose IPX/SPX protocol in the Network Protocols list. Then, click the OK button.

32

33

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Dual-Band Wireless Access Point Copyright & Trademarks Introduction Table of ContentsNetwork Topology Planning Your Wireless NetworkPackage Contents System RequirementsReset Button Dual-Band Wireless Access Point’s Back PanelPower Power SwitchSetting Up the Dual- Band Wireless Access Point Instant WirelessTM Series Dual-Band Wireless Access Point Instant WirelessTM Series Instant WirelessTM Series Instant Wireless Series Setup Tab Configuring the Dual- Band Wireless Access PointSetting WEP Encryption Status Tab Password TabFilter Tab Help TabWireless Tab What Ieee 802.11a features are supported? Appendix a TroubleshootingFrequently Asked Questions Can the Access Point act as my Dhcp Server?What is BSS ID? What is Ad-hoc?What is Infrastructure? What is Roaming?How do I resolve issues with signal loss? What is WEP?What is a MAC Address? How do I reset the Access Point?Select Specify an IP Address Setting Up TCP/IP in WindowsTCP/IP Setup for Windows 95, 98, and Millennium IPX Setup for Windows 95, 98, and MillenniumIPX Setup for Windows TCP/IP Setup for Windows NTIPX Setup for Windows NT TCP/IP Setup for WindowsAppendix C Glossary TCP/IP Setup for Windows XPDouble click the Network and Internet Connections icon Instant WirelessTM Series Instant WirelessTM Series Instant Wireless Series Appendix D Specifications Environmental Appendix E Warranty InformationWeb FTP Site Technical Support RMA Issues FaxAppendix F Contact Information Sales InformationCopyright 2002 Linksys, All Rights Reserved

WAP51AB specifications

Linksys WAP51AB is a Wireless Access Point designed to provide high-speed wireless connectivity for both home and office environments. With its dual-band capabilities, it operates efficiently on both the 2.4 GHz and 5 GHz frequency bands, ensuring a stable connection for various applications, including streaming, video conferencing, and online gaming.

One of the standout features of the WAP51AB is its robust support for the latest wireless standards, including 802.11a/b/g. This versatility allows it to connect with a wide range of devices, from older wireless gadgets to the latest smartphones and laptops. Additionally, the access point enables simultaneous dual-band broadcasting, which helps to reduce congestion and improve the overall wireless experience.

The WAP51AB boasts advanced security features to protect users' data and privacy. It supports WPA2 encryption, ensuring robust security for wireless networks. The access point also offers MAC address filtering, which adds an additional layer of control over which devices can connect to the network, thereby enhancing security.

A key characteristic of the WAP51AB is its ease of setup and management. With the Linksys web-based configuration interface, users can quickly set up their network settings, manage bandwidth, and monitor connected devices with minimal hassle. This user-friendly interface simplifies the process for both novice and experienced users alike.

In terms of physical characteristics, the WAP51AB features a sleek, compact design that allows for easy mounting on walls or ceilings, making it an ideal choice for various deployment scenarios. The external antennas enhance wireless coverage, providing a reliable signal across larger areas, which is particularly useful in environments such as schools, warehouses, or multi-story buildings.

The Linksys WAP51AB also supports Power over Ethernet (PoE), enabling flexible placement options without the need for additional power sources. This feature is particularly advantageous in commercial settings where power outlets may be limited.

In summary, the Linksys WAP51AB stands out for its dual-band support, robust security features, user-friendly setup, and flexible installation options, making it an excellent choice for anyone looking to enhance their wireless networking capabilities. Whether for home use or in a business environment, this access point delivers reliable performance and comprehensive coverage to meet diverse connectivity needs.
Top Page Image Contents