Linksys WAP51AB manual Appendix C Glossary, TCP/IP Setup for Windows XP

Page 21

Instant Wireless™ Series

4.Select NWLink IPX/SPX/NetBIOS Compatible Transport Protocol from the list and click the OK button.

5.When the Network window reappears, click the OK button. Restart your computer. NWLink IPX/SPX/NetBIOS Compatible Transport Protocol has now been successfully installed.

TCP/IP Setup for Windows XP

1.Click the Start button and open the Control Panel.

2.Double click the Network and Internet Connections icon.

3.Double click the Network Connections icon.

4.Right click the Local Area Connection icon and select Properties.

5.If the TCP/IP Protocol is listed for your network adapter, go to step five. Otherwise, click the Install button.

6.When the Component Type window appears, select Protocol, and click the Add button.

7.Select Internet Protocol (TCP/IP) from the list and click the OK button.

8.When the Local Area Connection Properties window reappears, select TCP/IP, and click the Properties button.

9.Select Use the following IP Address.

10.Enter an IP Address for the computer, along with a Subnet Mask and Default Gateway. Then, click the OK button. If you do not have these val- ues, consult your network administrator.

11.When the Local Area Connection Properties window reappears, click the OK button. TCP/IP has now been successfully installed..

Dual-Band Wireless Access Point

Appendix C: Glossary

Adapter - Printed circuit board that plugs into a PC to add to capabilities or connectivity to a PC. In a networked environment, a network interface card is the typical adapter that allows the PC or server to connect to the intranet and/or Internet.

Ad-hoc Network - An ad-hoc network is a wireless network or other small net- work in which some of the network devices are part of the network only for the duration of a communications session while in some close proximity to the rest of the network.

Backbone - The part of a network that connects most of the systems and net- works together and handles the most data.

Bandwidth - The transmission capacity of a given facility, in terms of how much data the facility can transmit in a fixed amount of time; expressed in bits per second (bps).

Beacon Interval - A beacon is a packet broadcast by the Access Point to keep the network synchronized. A beacon includes the wireless LAN service area, the AP address, the Broadcast destination addresses, a time stamp, Delivery Traffic Indicator Maps, and the Traffic Indicator Message (TIM).

Bit - A binary digit. The value - 0 or 1-used in the binary numbering system. Also, the smallest form of data.

Browser - A browser is an application program that provides a way to look at and interact with all the information on the World Wide Web or PC. The word "browser" seems to have originated prior to the Web as a generic term for user interfaces that let you browse text files online.

BSS (Basic Service Set) - A group of wireless Network PC Card users and an Access Point.

Buffer - A buffer is a shared or assigned memory area used by hardware devices or program processes that operate at different speeds or with different sets of priorities. The buffer allows each device or process to operate without being held up by the other. In order for a buffer to be effective, the size of the buffer and the algorithms for moving data into and out of the buffer need to be

36

37

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Dual-Band Wireless Access Point Copyright & Trademarks Introduction Table of ContentsPackage Contents Planning Your Wireless NetworkSystem Requirements Network TopologyPower Dual-Band Wireless Access Point’s Back PanelPower Switch Reset ButtonSetting Up the Dual- Band Wireless Access Point Instant WirelessTM Series Dual-Band Wireless Access Point Instant WirelessTM Series Instant WirelessTM Series Instant Wireless Series Setup Tab Configuring the Dual- Band Wireless Access PointSetting WEP Encryption Status Tab Password TabFilter Tab Help TabWireless Tab Frequently Asked Questions Appendix a TroubleshootingCan the Access Point act as my Dhcp Server? What Ieee 802.11a features are supported?What is Infrastructure? What is Ad-hoc?What is Roaming? What is BSS ID?What is a MAC Address? What is WEP?How do I reset the Access Point? How do I resolve issues with signal loss?TCP/IP Setup for Windows 95, 98, and Millennium Setting Up TCP/IP in WindowsIPX Setup for Windows 95, 98, and Millennium Select Specify an IP AddressIPX Setup for Windows NT TCP/IP Setup for Windows NTTCP/IP Setup for Windows IPX Setup for WindowsTCP/IP Setup for Windows XP Appendix C GlossaryDouble click the Network and Internet Connections icon Instant WirelessTM Series Instant WirelessTM Series Instant Wireless Series Appendix D Specifications Environmental Appendix E Warranty InformationAppendix F Contact Information Technical Support RMA Issues FaxSales Information Web FTP SiteCopyright 2002 Linksys, All Rights Reserved

WAP51AB specifications

Linksys WAP51AB is a Wireless Access Point designed to provide high-speed wireless connectivity for both home and office environments. With its dual-band capabilities, it operates efficiently on both the 2.4 GHz and 5 GHz frequency bands, ensuring a stable connection for various applications, including streaming, video conferencing, and online gaming.

One of the standout features of the WAP51AB is its robust support for the latest wireless standards, including 802.11a/b/g. This versatility allows it to connect with a wide range of devices, from older wireless gadgets to the latest smartphones and laptops. Additionally, the access point enables simultaneous dual-band broadcasting, which helps to reduce congestion and improve the overall wireless experience.

The WAP51AB boasts advanced security features to protect users' data and privacy. It supports WPA2 encryption, ensuring robust security for wireless networks. The access point also offers MAC address filtering, which adds an additional layer of control over which devices can connect to the network, thereby enhancing security.

A key characteristic of the WAP51AB is its ease of setup and management. With the Linksys web-based configuration interface, users can quickly set up their network settings, manage bandwidth, and monitor connected devices with minimal hassle. This user-friendly interface simplifies the process for both novice and experienced users alike.

In terms of physical characteristics, the WAP51AB features a sleek, compact design that allows for easy mounting on walls or ceilings, making it an ideal choice for various deployment scenarios. The external antennas enhance wireless coverage, providing a reliable signal across larger areas, which is particularly useful in environments such as schools, warehouses, or multi-story buildings.

The Linksys WAP51AB also supports Power over Ethernet (PoE), enabling flexible placement options without the need for additional power sources. This feature is particularly advantageous in commercial settings where power outlets may be limited.

In summary, the Linksys WAP51AB stands out for its dual-band support, robust security features, user-friendly setup, and flexible installation options, making it an excellent choice for anyone looking to enhance their wireless networking capabilities. Whether for home use or in a business environment, this access point delivers reliable performance and comprehensive coverage to meet diverse connectivity needs.
Top Page Image Contents