Linksys WRT400N manual Horizontal Placement, Wall-Mounting Placement

Page 6

Chapter 1

Product Overview

Horizontal Placement

The Router has four rubber feet on its bottom panel. Place the Router on a level surface near an electrical outlet.

Wall-Mounting Placement

The Router has two wall-mount slots on its bottom panel. The distance between the slots is 152 mm (6 inches).

Two screws are needed to mount the Router.

Suggested Mounting Hardware

4-5 mm

1-1.5 mm

-3.0 mm

2.5

 

 

††Note: Mounting hardware illustrations are not true to scale.

NOTE: Linksys is not responsible for damages incurred by insecure wall-mounting hardware.

Follow these instructions:

1.Determine where you want to mount the Router. Make sure that the wall you use is smooth, flat, dry, and sturdy. Also make sure the location is within reach of an electrical outlet.

2.Drill two holes into the wall. Make sure the holes are 152 mm (6 inches) apart.

3.Insert a screw into each hole and leave 3 mm (0.12 inches) of its head exposed.

4.Maneuver the Router so the wall-mount slots line up with the two screws.

5.Place the wall-mount slots over the screws and slide the Router down until the screws fit snugly into the wall-mount slots.

152 mm

Print this page at 100% size.

Cut along the dotted line, and place on the wall to drill precise spacing.

Wall-Mounting Template

Simultaneous Dual-Band Wireless-N Router

2

Image 6
Contents Simultaneous Dual-Band Wireless-N Router Icon Descriptions Online ResourcesCopyright and Trademarks Table of Contents Appendix D Regulatory Information Appendix E Software End User License AgreementFront Panel Back PanelHorizontal Placement Wall-Mounting PlacementGeneral Network Security Guidelines Additional Security TipsInternet Setup How to Access the Web-Based UtilitySetup Basic Setup LanguagePPPoE Automatic Configuration DhcpStatic IP PptpOptional Settings L2TPTelstra Cable Network Setup Network Address Server Settings DhcpRouter Address Ddns Service Setup DdnsTime Setting DynDNS.orgMAC Address Clone Setup MAC Address CloneSetup Advanced Routing Advanced RoutingGHz or 2.4 GHz Wireless Settings Wireless Basic Wireless SettingsConfiguration View Simultaneous NetworksWi-Fi Protected Setup Method #1Method #2 Security Mode Wireless Wireless SecurityWireless Security Method #3WPA2 Personal WPA2 EnterpriseRadius Access Restriction Wireless Wireless MAC FilterWireless MAC Filter MAC Address Filter ListWireless Advanced Wireless Settings GHz or 2.4 GHz Advanced WirelessFirewall Security FirewallSecurity VPN Passthrough Web FiltersInternet Access To create an Internet Access PolicyBlocked Applications Single Port Forwarding Applications and Gaming Single Port ForwardingApplications and Gaming Port Range Forwarding Port Range ForwardingPort Triggering Applications and Gaming DMZApplications & Gaming Port Triggering Triggered RangeApplications and Gaming QoS QoS Quality of ServiceInternet Access Priority CategoryEthernet Port Online Games MAC AddressGames Add a New GameAdministration Management Router PasswordSummary Log Administration LogAdministration Diagnostics Ping TestAdministration Factory Defaults Administration Firmware UpgradeStatus Router Status Local Network Status Wireless Network5GHz/2.4GHz Wireless Network Internet ConnectionAppendix a Troubleshooting Appendix B Specifications Limited Warranty Obtaining Warranty ServiceExclusions and Limitations Technical Support FCC Radiation Exposure Statement Safety NoticesFCC Statement Industry Canada StatementWireless Disclaimer Avis d’Industrie CanadaRestrictions dans la bande 5 GHz Dansk Danish Miljøinformation for kunder i EU Regulatory Information Norsk Norwegian Miljøinformasjon for kunder i EU Regulatory Information Cisco Products Software LicensesSchedule Cisco Software License Agreement Software End User License Agreement Software End User License Agreement Schedule 3-A Schedule Network Magic FeaturesSchedule Open Source and Third Party Licenses GNU General Public LicenseSoftware End User License Agreement Software End User License Agreement No Warranty Schedule 3-BEND of Schedule 3-A GNU Lesser General Public License Software End User License Agreement Software End User License Agreement Software End User License Agreement Schedule 3-C END of Schedule 3-BOpenSSL License Original SSLeay LicenseEND of Schedule 3-C