Chapter 3
Advanced Configuration
Shared Key Enter the key shared between the Router and the server.
Encryption Select a level of WEP encryption, 64 bits 10 hex digits or 128 bits 26 hex digits. The default is 64 bits 10 hex digits.
Passphrase Enter a Passphrase to automatically generate WEP keys. Then click Generate.
Key
Tx Key Select a key from the
WEP
WEP is a basic encryption method that is not as secure as WPA.
WEP
Encryption Select a level of WEP encryption, 64 bits 10 hex digits or 128 bits 26 hex digits. The default is 64 bits 10 hex digits.
Passphrase Enter a Passphrase to automatically generate WEP keys. Then click Generate.
Key
Tx Key Select a key from the
Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.
Wireless > Wireless MAC Filter
Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network’s radius.
Wireless > Wireless MAC Filter
Wireless MAC Filter
Access Restriction
Wireless MAC Filter To filter wireless users by MAC Address, either permitting or blocking access, click Enabled. If you do not wish to filter users by MAC Address, keep the default setting, Disabled.
Prevent PCs listed below from accessing the wireless network Select this to block wireless access by MAC Address. This option is selected by default.
Permit PCs listed below to the wireless network Select this to allow wireless access by MAC Address. This option is not selected by default.
MAC Address Filter List
Click the Wireless Client List button to display the Wireless Client List. It shows computers and other devices on the wireless network. Click the Save to MAC Address Filter List checkbox for any device you want to add to the MAC Address Filter List. Then click the Add button. To retrieve the most
Simultaneous | 14 |