Chapter 3
Advanced Configuration
Traceroute Test
Traceroute To test the performance of a connection, click Start to Traceroute to open the Traceroute Test screen. Enter the address of the computer whose connection you wish to test and click Traceroute. The Traceroute Test screen will show if the test was successful. Click Close to return to the Diagnostics screen.
Traceroute Test
Administration > Factory Defaults
The Administration > Factory Defaults screen allows you to restore the Router’s configuration to its factory default settings.
Factory Defaults
Restore Factory Defaults To reset the Router’s settings to the default values, select Restore Factory Defaults. Any settings you have saved will be lost when the default settings are restored.
Administration > Factory Defaults
Administration > Firmware Upgrade
The Administration > Firmware Upgrade screen allows you to upgrade the Router’s firmware. Do not upgrade the firmware unless you are experiencing problems with the Router or the new firmware has a feature you want to use.
Administration > Firmware Upgrade
Before upgrading the firmware, download the Router’s firmware upgrade file from the Linksys website, www.linksys.com. Then extract the file.
Upgrade Firmware
Please select a file to upgrade Click Browse and select the extracted firmware upgrade file. Then click Upgrade and follow the
Status > Router
The Status > Router screen displays the Router’s current status.
Status > Router
Router Information
Firmware Version This is the Router’s current firmware.
Firmware Verification This is a unique identifier that verifies that you have valid firmware.
Current Time This shows the time, as you set on the Setup tab.
Simultaneous | 24 |