Skipping channels
You can simplify the list of channels that you see when you rotate the dial. To skip over a channel:
1.Use the “menu” button and dial to select “Channel Access.”
2. Choose the “Channel Skip/Add” option.
3.You will see a list of channels. There is a
“+” or a
of each channel. To skip a channel, highlight that channel and
press the dial in to
change the “+” to
4.When you’re done, press the “menu” button twice
(or do nothing for 15 seconds) until your AirWare returns to normal operation.
TIP: You can still tune to any channel by entering the channel number or by pressing a preset. Skipping a channel does not remove it from use.
TIP: This should not be used for “parental control.” To completely block access to any XM channel, contact XM Listener Care at 1.800.XM.RADIO (1.800.967.2346).
Returning to factory defaults
You can return your AirWare to its
1.Use the “menu” button and dial to select “Set Factory Defaults.”
2.Select “Yes” to restore your AirWare to the factory settings.
Using AirWare At Home
Turn off your AirWare and your audio system. Connect your AirWare to your audio system in either way illustrated below.
If you use the home docking station and connect it to a stereo, you must plug in the AC adaptor and home antenna. Your AirWare’s audio output will not work if these are not connected.
If you attach your AirWare to powered speakers, adjust the audio level using the speakers’ volume control.
TIP: If you hear nothing, try adjusting the volume controls located on your AirWare. If there does not appear to be power, check all connections and make sure all plugs are inserted completely.
28 | 29 |
