Pioneer GEX-AIRWARE1 manual My XM Time-shifting Memory Mode, Scheduling a session

My XM Time-shifting Memory Mode

2go: Store and play back

Your AirWare lets you store up to five hours of programming and play it back at a later time or where live signal reception is limited. Listen to XM wherever you are, whenever you prefer.

TO STORE BY PRESSING	1
ONE BUTTON:

1. Turn on your AirWare and select a channel.

2. Press the “2go” button. To prevent you from accidentally

recording over a previously 2 stored program, your AirWare will ask you to confirm. Press the “2go” button again. The center of the top line of your AirWare’s screen switches from “LIVE” to “REC.”

TIP: Press and hold the “2go” button and you can automatically bypass the second confirmation “2go” button press.

3.To stop storing and continue with live programming, press the “2go” button again. The display reverts to “LIVE” mode.

TO PLAY BACK:
1. Press the ”mode” button.
Your AirWare switches from				3
“LIVE” to “MY XM” and will
begin to play back from the
beginning or where you last
stopped or paused.			1	2
2. “MY XM” holds up to five
hours of programming. Press
either the “	” or “	”

button to skip to the previous or to the next song.

3.You can also rotate the dial to view a list of the stored artists and songs. Simply highlight an

artist with the dial, then press the dial in to listen to it.

4.To return to LIVE listening, press the “mode” button again.

Scheduling a session

You can set your AirWare to store XM programming at a specific time using the “MY XM” Time-shifting Memory Mode.

1.Press the “menu” button and use the dial to select “MY XM.”

2.Select “Schedule MY XM.”

3.You can schedule up to two sessions. Choose “Session 1” or “Session 2.”

4.Rotate the dial to change and press the dial in to fill in the “How Often?,” starting time, ending time, and channel fields. The “How Often?” option allows you to activate the session “Once,” “Every Day,” or “Off” (postponing until another time).

TIP: You can use the number buttons to enter the channel number. You can also use the up, down, and XM buttons on the remote to enter time and make selections.

5. Set up the second session, if you desire.

The combined time

for both sessions should not exceed five

hours in one day and

the sessions may not overlap each other.

Your AirWare will advise

you if either condition occurs, and will give you another chance to schedule the sessions.

6.Turn off your AirWare. When the session starts, the display will show “Session 1 (or 2) Recording.” If your AirWare is already on when the session is supposed to start, AirWare skips the session and does not interrupt your listening. When the session starts, it writes over the oldest stored programs first, ensuring that you’re always listening to the freshest programming.

Important!: You can only store a session if your AirWare is turned off and plugged into the home stand, with the AC adaptor connected and receiving power. You must connect the home antenna to receive the XM signal.

TIP: If you set the alarm to turn on your AirWare before a session is scheduled to start, that session could be cancelled if the AirWare is on and not off to begin the session.

7.To erase the stored content, choose the “Clear MY XM” option under the “MY XM” menu. All previously recorded content can no longer be accessed.

20 21