Personalizing Your AirWare
You can easily adapt your AirWare to the way you listen and use the satellite radio. You can change how the display appears, track stocks and other information, adjust your AirWare’s audio output, and change how you use the display.
Simply press the “menu” button, rotate the dial to highlight an option, and press the dial in to select. Your AirWare guides you with instructions right on the screen.
If you ever get lost or decide not to change anything, press the “menu” button to return to normal operation. Or wait for about 15 seconds and your AirWare reverts by itself.
Adjusting audio
You can ADJUST THE BASS OR TREBLE, which affects both the headphones and audio outputs of the home stand and vehicle cradle.
1. Press the “menu”
button and use the
dial to select “Set
Audio.”
2.Select “Set Tone.”
3.Rotate the dial to high- light either “bass” or “treble.” Press the dial in to select.
4.Rotate the dial to
change the bass or treble level. Press the dial in to confirm.
5.When you’re done, press the “menu” button until you return to normal operation.
Caution: Before putting on the headset, always adjust the volume setting at the lowest level to avoid possible hearing damage.
TO CHANGE THE AUDIO LEVEL of the cassette adaptor, FM transmitter, or
1.Press the “menu” button and use the dial to select “Set Audio.”
2.Select “Line Out Level.” Your AirWare can detect when you’re using the FM transmitter or cassette adaptor and will make the appropriate changes to the settings.
3.Rotate the dial to change the audio level. Push the dial in to confirm.
4.When you’re done, press the “menu” button until you return to normal operation.
Changing display information
TO DISPLAY DIFFERENT INFORMATION ON THE SCREEN, press the “display” button to cycle through these options:
Primary display format | Stock Ticker format |
Info Extras format | Scrolling text format |
22 | 23 |